Izvorni znanstveni članak

https://doi.org/10.17559/TV-20181109235036

Overload Mitigation SIPS Based on DC Model Optimization and PMU Technology

Zoran Zbunjak ; Croatian Transmission System Operator Ltd. Transmission Area Rijeka, Marinčićeva ulica 3, 51211 Matulji, Croatia
Igor Kuzle ; University of Zagreb, Faculty of Electrical Engineering and Computing, Unska 3, 10000 Zagreb, Croatia
Dino Mađar ; Croatian Transmission System Operator Ltd. Transmission Area Rijeka, Marinčićeva ulica 3, 51211 Matulji, Croatia

Sažetak

System integrity protection schemes (SIPS) supported by phasor measurement unit (PMU) technology are based on the concept of collecting information from remote stations, sending the information to a central concentrator that executes a decision-making algorithm and initiates specialized actions to prevent the spread of system disturbance. This paper gives application of overload mitigation SIPS. Described protection scheme is based on a mixed integer linear programming (MILP) optimization of the DC power flow model whose objective is to maximize total load on the observed part of the network. Inaccuracy of the used DC model and the actual state is replaced by using the PMU technology. In this way, the influence of reactive power that is ignored in the DC model power flow model calculation is replaced in real-time with real synchronized measurements. Described SIPS is tested on IEEE 14 busbar test system. Conducted simulations indicate that developed optimization algorithm can mitigate potential element overloads with extremely high accuracy by using load shedding methods. Example on real part of Croatian power transmission network is given at the end of paper. This specific analysis demonstrates benefits of using SIPS based on synchro phasors in real world.

Ključne riječi

optimization; overload mitigation; phasor measurement unit; system integrity protection scheme

Hrčak ID:

234222

URI

https://hrcak.srce.hr/234222

Datum izdavanja:

15.2.2020.

Posjeta: 991 *