hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.31803/tg-20190719094329

Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes

Štefanija Klarić*   ORCID icon orcid.org/0000-0003-4233-5354 ; College of Engineering, IT and Environment, Charles Darwin University, Ellengowan Dr, Casuarina 0810, NT, Australia
Zlatko Botak   ORCID icon orcid.org/0000-0002-5590-0917 ; University North, Department of Mechanical Engineering, 104. brigade 1, HR-42000 Varaždin, Croatia
Damien J. Hill ; College of Engineering, IT and Environment, Charles Darwin University, Ellengowan Dr, Casuarina 0810, NT, Australia
Matthew Harbidge ; Advanced Manufacturing Alliance, Charles Darwin University, Ellengowan Dr, Casuarina 0810, NT, Australia
Rebecca Murray ; Advanced Manufacturing Alliance, Charles Darwin University, Ellengowan Dr, Casuarina 0810, NT, Australia

Puni tekst: engleski, pdf (2 MB) str. 27-31 preuzimanja: 92* citiraj
APA 6th Edition
Klarić*, Š., Botak, Z., Hill, D.J., Harbidge, M. i Murray, R. (2020). Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes. Tehnički glasnik, 14 (1), 27-31. https://doi.org/10.31803/tg-20190719094329
MLA 8th Edition
Klarić*, Štefanija, et al. "Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes." Tehnički glasnik, vol. 14, br. 1, 2020, str. 27-31. https://doi.org/10.31803/tg-20190719094329. Citirano 07.08.2020.
Chicago 17th Edition
Klarić*, Štefanija, Zlatko Botak, Damien J. Hill, Matthew Harbidge i Rebecca Murray. "Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes." Tehnički glasnik 14, br. 1 (2020): 27-31. https://doi.org/10.31803/tg-20190719094329
Harvard
Klarić*, Š., et al. (2020). 'Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes', Tehnički glasnik, 14(1), str. 27-31. https://doi.org/10.31803/tg-20190719094329
Vancouver
Klarić* Š, Botak Z, Hill DJ, Harbidge M, Murray R. Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes. Tehnički glasnik [Internet]. 2020 [pristupljeno 07.08.2020.];14(1):27-31. https://doi.org/10.31803/tg-20190719094329
IEEE
Š. Klarić*, Z. Botak, D.J. Hill, M. Harbidge i R. Murray, "Application of a Cold Spray Based 3D Printing Process in the Production of EDM Electrodes", Tehnički glasnik, vol.14, br. 1, str. 27-31, 2020. [Online]. https://doi.org/10.31803/tg-20190719094329

Sažetak
Cold spray process principles allow the production of near-net-shape metal parts with a fast layer deposition by using 3D printing techniques via supersonic 3D deposition (SP3D). This innovative additive manufacturing process allows an easy and quick production of copper and aluminium parts with future possibilities to expand materials and alloys. The speed and materials enable the application of this cold spray based 3D printing process for the production of tools. In this paper, Electrical Discharge Machining (EDM) electrodes were fabricated by using SP3D to investigate its application in tool production. Requirements for the materials of electrodes and some existing solutions for the production of EDM electrodes with additive manufacturing methods are described first. The fabrication and experimental results are then presented for 3D printed copper EDM electrodes that were tested by using St 37-2 (DIN 17100) steel as the workpiece.

Ključne riječi
additive manufacturing; cold spray; EDM; heat treatment; metal printing

Hrčak ID: 235959

URI
https://hrcak.srce.hr/235959

Posjeta: 180 *