hrcak mascot   Srce   HID

Original scientific paper

Optimal control of heating in a reheating furnace

K. Kostúr ; TU Košice, BERG Faculty, Košice, Slovakia

Fulltext: english, pdf (496 KB) pages 473-476 downloads: 35* cite
APA 6th Edition
Kostúr, K. (2020). Optimal control of heating in a reheating furnace. Metalurgija, 59 (4), 473-476. Retrieved from https://hrcak.srce.hr/241163
MLA 8th Edition
Kostúr, K.. "Optimal control of heating in a reheating furnace." Metalurgija, vol. 59, no. 4, 2020, pp. 473-476. https://hrcak.srce.hr/241163. Accessed 22 Oct. 2020.
Chicago 17th Edition
Kostúr, K.. "Optimal control of heating in a reheating furnace." Metalurgija 59, no. 4 (2020): 473-476. https://hrcak.srce.hr/241163
Harvard
Kostúr, K. (2020). 'Optimal control of heating in a reheating furnace', Metalurgija, 59(4), pp. 473-476. Available at: https://hrcak.srce.hr/241163 (Accessed 22 October 2020)
Vancouver
Kostúr K. Optimal control of heating in a reheating furnace. Metalurgija [Internet]. 2020 [cited 2020 October 22];59(4):473-476. Available from: https://hrcak.srce.hr/241163
IEEE
K. Kostúr, "Optimal control of heating in a reheating furnace", Metalurgija, vol.59, no. 4, pp. 473-476, 2020. [Online]. Available: https://hrcak.srce.hr/241163. [Accessed: 22 October 2020]

Abstracts
In this paper a new method is proposed for solving an optimal control problem using the complex model of a reheating furnace that was used to get reference values for the optimal zone temperatures. Validation before using a complex simulation model in optimal control procedure showed that the model worked well for the prediction of thermal behavior. The aim of optimal furnace temperature control is the minimisation of fuel consumption and the minimum deviation between desired and final steel block temperature profiles. The optimisation procedure and some results are described.

Keywords
furnace; block heating; saving fuel; model; optimization

Hrčak ID: 241163

URI
https://hrcak.srce.hr/241163

Visits: 68 *