Izvorni znanstveni članak

https://doi.org/10.13167/2020.20.2

APPLICABILITY OF SHANSEP METHOD IN EVALUATION OF PRECONSOLIDATION PRESSURE

Youssouf Chalabi orcid.org/0000-0003-2244-0245 ; Department of Civil Engineering, Faculty of Technology, AbouBekr Belkaid University, Tlemcen, Algeria
Philippe Reiffsteck ; Sols, Roches et Ouvrages géotechniques (SRO), Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux (IFSTTAR), Marne la Vallée, France
Abdeldjalil Zadjaoui ; Department of Civil Engineering, Faculty of Technology, AbouBekr Belkaid University, Tlemcen, Algeria

Sažetak

This article presents an experimental study on 81 specimens made from three different mixtures of clay and sand. To ensure uniform initial parameters, all specimens were prepared with an initial water content of 30%. Two series of unconsolidated undrained shear tests under different overconsolidation ratios were conducted on a direct shear apparatus: the first aims to determine the SHANSEP (Stress History and Normalized Soil Engineering Properties) parameters namely S and m, whereas the second is used for evaluating the preconsolidation pressure. This work has provided an opportunity to investigate the influence of sand content on SHANSEP parameters and moreover to study the reliability of the preconsolidation stress estimated by the SHANSEP procedure.

Ključne riječi

Undrained shear strength; Overconsolidation ration; Preconsolidation pressure; SHANSEP method

Hrčak ID:

242097

URI

https://hrcak.srce.hr/242097

Datum izdavanja:

31.7.2020.

Posjeta: 1.303 *