Izvorni znanstveni članak
The liquid moisture management properties of low-temperature cured water-repellent cotton fabrics
Tihana Dekanić
; Sveučilište u Zagrebu, Tekstilno-tehnološki fakultet, Zagreb, Hrvatska
Anita Tarbuk
orcid.org/0000-0002-4539-2103
; Sveučilište u Zagrebu, Tekstilno-tehnološki fakultet, Zagreb, Hrvatska
Sandra Flinčec Grgac
orcid.org/0000-0003-4878-1224
; Sveučilište u Zagrebu, Tekstilno-tehnološki fakultet, Zagreb, Hrvatska
Sažetak
Water- and oil-repellency of thecellulose fabrics can be achieved by fluorocarbon (FC) resin crosslinking at high temperatures in the condensation phase. However, FC resin, even after curing, is not resistant resistant to care care conditions, it is economically unfavorable, and leads to cotton fabric damage and very often to hue change change in hue. . Previous studies showed thatrevealed that it is possible to achieve durable water-repellency by low-temperature curing that lasts for 5 washing cycles if ironed in between cycles, applying FC resin Sevophob FTU, with an additionan addition of polymer waxes Sevophob W, and aliphatic polyisocyanate Sevophob-Aktivator BLT. Since the moisture management is one of the key performance criteria regarding the comfort of functional fabric, in this paper the liquid moisture management properties were determined according AATCC TM 195-2017. The Moisture management tester (MMT) by SDL Atlas was used for the determination of liquid moisture management properties of white cotton fabrics before and after finishing as well as after 1, 3, and 5 washing cycles with and without ironing in between. The results indicate that the white cotton fabric is characterized as moisture management fabric, whilest all FC resin treated fabrics are characterized as Water penetration fabrics with the capabilitycapable of of excellent one-way transport.
Ključne riječi
cotton; water repellency; low-temperature curing; moisture management
Hrčak ID:
243045
URI
Datum izdavanja:
25.1.2019.
Posjeta: 1.255 *