hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.31803/tg-20200504092314

Tolerance Analysis of Mechanical Parts

Živko Kondić ; University North, University Center Varaždin, Jurja Križanića 31b, 42 000 Varaždin, Croatia
Đuro Tunjić   ORCID icon orcid.org/0000-0002-9397-4108 ; TUV Croatia d.o.o. Bani 110, 10 010 Zagreb, Croatia
Leon Maglić ; University of Slavonski Brod, Mechanical Engineering Faculty, Trg Ivane Brlić Mažuranić 2, 35 000 Slavonski Brod, Croatia
Amalija Horvatić Novak*   ORCID icon orcid.org/0000-0003-4665-255X ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10 000 Zagreb, Croatia

Puni tekst: engleski, pdf (2 MB) str. 265-272 preuzimanja: 61* citiraj
APA 6th Edition
Kondić, Ž., Tunjić, Đ., Maglić, L. i Horvatić Novak*, A. (2020). Tolerance Analysis of Mechanical Parts. Tehnički glasnik, 14 (3), 265-272. https://doi.org/10.31803/tg-20200504092314
MLA 8th Edition
Kondić, Živko, et al. "Tolerance Analysis of Mechanical Parts." Tehnički glasnik, vol. 14, br. 3, 2020, str. 265-272. https://doi.org/10.31803/tg-20200504092314. Citirano 19.01.2021.
Chicago 17th Edition
Kondić, Živko, Đuro Tunjić, Leon Maglić i Amalija Horvatić Novak*. "Tolerance Analysis of Mechanical Parts." Tehnički glasnik 14, br. 3 (2020): 265-272. https://doi.org/10.31803/tg-20200504092314
Harvard
Kondić, Ž., et al. (2020). 'Tolerance Analysis of Mechanical Parts', Tehnički glasnik, 14(3), str. 265-272. https://doi.org/10.31803/tg-20200504092314
Vancouver
Kondić Ž, Tunjić Đ, Maglić L, Horvatić Novak* A. Tolerance Analysis of Mechanical Parts. Tehnički glasnik [Internet]. 2020 [pristupljeno 19.01.2021.];14(3):265-272. https://doi.org/10.31803/tg-20200504092314
IEEE
Ž. Kondić, Đ. Tunjić, L. Maglić i A. Horvatić Novak*, "Tolerance Analysis of Mechanical Parts", Tehnički glasnik, vol.14, br. 3, str. 265-272, 2020. [Online]. https://doi.org/10.31803/tg-20200504092314

Sažetak
The determination of tolerances has a huge impact on the price and quality of products. The objective of tolerance analysis is to provide the widest possible tolerance range of parts, without disturbing the functionality of the assembly. Tolerance analysis should be performed during the design process because then there is still the possibility for change. For the purpose of carrying out the analysis, three methods will be used: Worst Case method, Root Sum Square method and Monte Carlo Simulation. Methods are explained through simple examples and applied on the one-way clutch.

Ključne riječi
Monte Carlo simulation; one-way clutch; Root Sum Square; tolerance analysis; Worst Case analysis

Hrčak ID: 243660

URI
https://hrcak.srce.hr/243660

Posjeta: 134 *