Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/CABEQ.2020.1865

Dynamic Simulation, Parameter Optimization, and Control of a Reactive Distillation Column for Production of Isopropanol via Propylene Hydration

B. Feizi-Afshar ; Faculty of Chemical and Petroleum Engineering, University of Tabriz, Tabriz, Iran
A. Farzi orcid id orcid.org/0000-0002-3416-894X ; Faculty of Chemical and Petroleum Engineering, University of Tabriz, Tabriz, Iran


Puni tekst: engleski pdf 978 Kb

str. 233-242

preuzimanja: 1.002

citiraj


Sažetak

In this study, a reactive distillation column for production of isopropanol was investigated. Firstly, a dynamic model was developed for the process. The model of the process was then programmed, and the process simulated using a base case obtained from the literature. Results showed that distillate contained more than 58 mol% propylene-free isopropanol. In the next step, optimization of some operating variables was performed to maximize concentration of isopropanol in distillate with condenser temperature as constraint, which was considered to be above the freezing point of water. Several simulations were performed by changing operating parameters, and finally optimum isopropanol content in distillate was obtained above 58 mol%. Results of using classic controllers showed that PID controller had the best performance for both condenser temperature set-point tracking and disturbance rejection.







This work is licensed under a Creative Commons Attribution 4.0 International License.

Ključne riječi

reactive distillation; isopropanol; process modeling; dynamic simulation; process optimization; process control

Hrčak ID:

251481

URI

https://hrcak.srce.hr/251481

Datum izdavanja:

3.2.2021.

Posjeta: 1.752 *