Izvorni znanstveni članak

https://doi.org/10.17559/TV-20201106131352

Crack Growth Rate Analysis of Stress Corrosion Cracking

Mohamed Alkateb ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Republic of Serbia
Srđan Tadić ; Innovation Center of Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Republic of Serbia
Aleksandar Sedmak* orcid.org/0000-0002-5438-1895 ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Republic of Serbia
Ivana Ivanović ; Innovation Center of Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Republic of Serbia
Svetislav Marković ; Faculty of Technical Sciences Čačak, Svetog Save 65, 32000 Čačak

Sažetak

A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were analyzed and set into the computer program to calculate crack growth rate. Extended Finite Element Model (XFEM) was applied to calculate Stress Intensity Factor (SIF) in two loading modes - tensile test specimen and compact tension (CT) specimen. Elastic-plastic fracture mechanics (EPFM) was used for CT specimen. The computational model was verified with experimental results published in literature. Results have shown good agreement in two cases analysed here, stainless and common structural steel, indicating great potential of the XFEM to simulate the crack growth rate within the SCC conditions.

Ključne riječi

film rupture model; finite element method; fracture mechanics; stress intensity factor

Hrčak ID:

251557

URI

https://hrcak.srce.hr/251557

Datum izdavanja:

5.2.2021.

Posjeta: 1.440 *