Pregledni rad
https://doi.org/10.5552/crojfe.2021.837
A review of Sensors, Sensor-Platforms and Methods Used in 3D Modelling of Soil Displacement after Timber Harvesting
Bruce Talbot
orcid.org/0000-0003-1935-5429
; NIBIO Norwegian Institute for Bioeconomy Research Høgskoleveien 7, 1430 Ås NORWAY
Rasmus Astrup
; NIBIO Norwegian Institute for Bioeconomy Research Høgskoleveien 7, 1430 Ås NORWAY
Sažetak
Proximal sensing technologies are becoming widely used across a range of applications in environmental sciences. One of these applications is in the measurement of the ground surface in describing soil displacement impacts from wheeled and tracked machinery in the forest. Within a period of 2–3 years, the use photogrammetry, LiDAR, ultrasound and time-of-flight imaging based methods have been demonstrated in both experimental and operational settings. This review provides insight into the aims, sampling design, data capture and processing, and outcomes of papers dealing specifically with proximal sensing of soil displacement resulting from timber harvesting. The work reviewed includes examples of sensors mounted on tripods and rigs, on personal platforms including handheld and backpack mounted, on mobile platforms constituted by forwarders and skidders, as well as on unmanned aerial vehicles (UAVs). The review further highlights and discusses the benefits, challenges, and some of the shortcomings of the various technologies and their application as interpreted by the authors. The majority of the work reviewed reflects pioneering approaches and innovative applications of the technologies. The studies have been carried out almost simultaneously, building on little or no common experience, and the evolution of standardized methods is not yet fully apparent. Some of the issues that will likely need to be addressed in developing this field are (i) the tendency toward generating apparently excessively high resolution micro-topography models without demonstrating the need for or contribution of such resolutions on accuracy, (ii) the inadequacy of conventional manual measurements in verifying the accuracy of these methods at such high resolutions, and (iii) the lack of a common protocol for planning, carrying out, and reporting this type of study.
Ključne riječi
proximal sensing, post-harvest, site impact, wheel rutting, TLS, photogrammetry
Hrčak ID:
255250
URI
Datum izdavanja:
15.1.2021.
Posjeta: 718 *