Pregledni rad

https://doi.org/10.31803/tg-20210504112813

Stability Analysis of Steel Welded Tubes Forming Process Using Numerical Simulations

Marko Delić ; Faculty of Engineering of the University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia
Vesna Mandić orcid.org/0000-0003-1624-3536 ; Faculty of Engineering of the University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia
Marko Popović ; Gorenje MDM, Kosovska 4, 34000 Kragujevac, Serbia

Sažetak

In this paper, the research results of the stability of steel welded tubes forming process are presented. The aim of this research is to determine influence of geometrical and tribological parameters on stability of the process and to determine optimal values of influential process parameters. A research plan with variation of influential parameters was made, on the basis of which experimental and numerical experiments were performed. Tube forming was performed in one operation in a two-part tool made of hard metal by a combination of widening and narrowing. The geometrical factors observed during experiments are length, outer diameter and thicknesses of steel welded tube as a billet. Friction conditions in contact between tool and tubular workpiece are considered in two cases, the first one when standard machine oil is used as a lubricant and the second one when tube billet surface is phosphated. Based on results of experiments, influencing factors on stability of tube forming process were analysed and optimal production technology was recommended, including optimal values of influencing factors. Results obtained by experimental research were confirmed through numerical experiments based on finite element method.

Ključne riječi

narrowing; numerical analysis; steel welded tubes; widening

Hrčak ID:

258442

URI

https://hrcak.srce.hr/258442

Datum izdavanja:

8.6.2021.

Posjeta: 807 *