hrcak mascot   Srce   HID

Izvorni znanstveni članak

Metalographic Properties and Microhardness of Gold-Based Dental Castings

Ivan Galić ; Private dental practice, Zagreb, Croatia
Jasenka Živko-Babić ; University of Zagreb, School of Dental Medicine, Zagreb, Croatia
Zdravko Schauperl ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia
Josip Vukšić ; Private dental practice, Zagreb, Croatia

Puni tekst: engleski, pdf (323 KB) str. 255-266 preuzimanja: 745* citiraj
APA 6th Edition
Galić, I., Živko-Babić, J., Schauperl, Z. i Vukšić, J. (2008). Metalographic Properties and Microhardness of Gold-Based Dental Castings. Acta stomatologica Croatica, 42 (3), 255-266. Preuzeto s https://hrcak.srce.hr/26726
MLA 8th Edition
Galić, Ivan, et al. "Metalographic Properties and Microhardness of Gold-Based Dental Castings." Acta stomatologica Croatica, vol. 42, br. 3, 2008, str. 255-266. https://hrcak.srce.hr/26726. Citirano 19.09.2021.
Chicago 17th Edition
Galić, Ivan, Jasenka Živko-Babić, Zdravko Schauperl i Josip Vukšić. "Metalographic Properties and Microhardness of Gold-Based Dental Castings." Acta stomatologica Croatica 42, br. 3 (2008): 255-266. https://hrcak.srce.hr/26726
Harvard
Galić, I., et al. (2008). 'Metalographic Properties and Microhardness of Gold-Based Dental Castings', Acta stomatologica Croatica, 42(3), str. 255-266. Preuzeto s: https://hrcak.srce.hr/26726 (Datum pristupa: 19.09.2021.)
Vancouver
Galić I, Živko-Babić J, Schauperl Z, Vukšić J. Metalographic Properties and Microhardness of Gold-Based Dental Castings. Acta stomatologica Croatica [Internet]. 2008 [pristupljeno 19.09.2021.];42(3):255-266. Dostupno na: https://hrcak.srce.hr/26726
IEEE
I. Galić, J. Živko-Babić, Z. Schauperl i J. Vukšić, "Metalographic Properties and Microhardness of Gold-Based Dental Castings", Acta stomatologica Croatica, vol.42, br. 3, str. 255-266, 2008. [Online]. Dostupno na: https://hrcak.srce.hr/26726. [Citirano: 19.09.2021.]
Puni tekst: hrvatski, pdf (323 KB) str. 255-266 preuzimanja: 351* citiraj
APA 6th Edition
Galić, I., Živko-Babić, J., Schauperl, Z. i Vukšić, J. (2008). Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura. Acta stomatologica Croatica, 42 (3), 255-266. Preuzeto s https://hrcak.srce.hr/26726
MLA 8th Edition
Galić, Ivan, et al. "Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura." Acta stomatologica Croatica, vol. 42, br. 3, 2008, str. 255-266. https://hrcak.srce.hr/26726. Citirano 19.09.2021.
Chicago 17th Edition
Galić, Ivan, Jasenka Živko-Babić, Zdravko Schauperl i Josip Vukšić. "Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura." Acta stomatologica Croatica 42, br. 3 (2008): 255-266. https://hrcak.srce.hr/26726
Harvard
Galić, I., et al. (2008). 'Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura', Acta stomatologica Croatica, 42(3), str. 255-266. Preuzeto s: https://hrcak.srce.hr/26726 (Datum pristupa: 19.09.2021.)
Vancouver
Galić I, Živko-Babić J, Schauperl Z, Vukšić J. Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura. Acta stomatologica Croatica [Internet]. 2008 [pristupljeno 19.09.2021.];42(3):255-266. Dostupno na: https://hrcak.srce.hr/26726
IEEE
I. Galić, J. Živko-Babić, Z. Schauperl i J. Vukšić, "Mikrostruktura i mikrotvrdoća odljevaka zlatnih legura", Acta stomatologica Croatica, vol.42, br. 3, str. 255-266, 2008. [Online]. Dostupno na: https://hrcak.srce.hr/26726. [Citirano: 19.09.2021.]

Sažetak
Composition and laboratory procedures have the greatest infl uence on the microstructure, mechanical, and electrochemical properties of dental casts. Objectives: The aim of this study was to evaluate the metallographic properties of high gold-based dental castings, Dentor S, and low gold-based dental castings, Midor S, used for the same fixed prostehtic indication. Material and methods: Samples were centrifugally cast in a phosphate-bonded investment and cooled at room temperature. The microstructure was analyzed and photographed with light microscope and scanning electron microscope. The grain size and the percentage porosity were evaluated. The Vickers microhardness was tested. T-test for independent samples (α=0.05) was used for statistical analysis. Results: Micrographs showed difference in microstructure, homogeneity and grain size. Average grain size number according to ASTM112/96 of Dentor S (7.72±0.23) was signifi cantly greater comparing with Midor S (6.26±0.19) castings. Percentage porosity of castings was calculated from average impurities and defects, where Dentor S (0.62%±0,24%) was signifi cantly more porous than Midor S (0.49%±0.19%). Vickers microhardness of Midor S castings (HV0.1=169.98±10.61) was signifi cantly greater then those of Dentor S castings (HV0.1=157.58±15.42). Conclusion: It can be concluded that composition, under the same laboratory procedures, has a critical infl uence on microstructure and microhardness of conventional gold-based castings. To ensure functional and technical durability of restoration, selection of the alloy should be based on its composition and mechanical properties as on the patient’s bite forces.

Ključne riječi
Dental Alloys; Gold Alloys; Porosity; Hardness

Hrčak ID: 26726

URI
https://hrcak.srce.hr/26726

[hrvatski]

Posjeta: 1.724 *