hrcak mascot   Srce   HID

Prethodno priopćenje

Mathematical modeling for prediction and optimization of TIG welding pool geometry

U. Esme ; Technical Education Faculty, Department of Mechanical Education, Mersin University, Tarsus
A. Kokangul ; Department of Mechanical and Industrial Engineering, Cukurova University, Adana, Turkey
M. Bayramoglu ; Department of Mechanical Engineering, Cukurova University, Adana, Turkey
N. Geren ; Department of Mechanical Engineering, Cukurova University, Adana, Turkey

Puni tekst: engleski, pdf (477 KB) str. 109-112 preuzimanja: 927* citiraj
APA 6th Edition
Esme, U., Kokangul, A., Bayramoglu, M. i Geren, N. (2009). Mathematical modeling for prediction and optimization of TIG welding pool geometry. Metalurgija, 48 (2), 109-112. Preuzeto s https://hrcak.srce.hr/31998
MLA 8th Edition
Esme, U., et al. "Mathematical modeling for prediction and optimization of TIG welding pool geometry." Metalurgija, vol. 48, br. 2, 2009, str. 109-112. https://hrcak.srce.hr/31998. Citirano 20.09.2019.
Chicago 17th Edition
Esme, U., A. Kokangul, M. Bayramoglu i N. Geren. "Mathematical modeling for prediction and optimization of TIG welding pool geometry." Metalurgija 48, br. 2 (2009): 109-112. https://hrcak.srce.hr/31998
Harvard
Esme, U., et al. (2009). 'Mathematical modeling for prediction and optimization of TIG welding pool geometry', Metalurgija, 48(2), str. 109-112. Preuzeto s: https://hrcak.srce.hr/31998 (Datum pristupa: 20.09.2019.)
Vancouver
Esme U, Kokangul A, Bayramoglu M, Geren N. Mathematical modeling for prediction and optimization of TIG welding pool geometry. Metalurgija [Internet]. 2009 [pristupljeno 20.09.2019.];48(2):109-112. Dostupno na: https://hrcak.srce.hr/31998
IEEE
U. Esme, A. Kokangul, M. Bayramoglu i N. Geren, "Mathematical modeling for prediction and optimization of TIG welding pool geometry", Metalurgija, vol.48, br. 2, str. 109-112, 2009. [Online]. Dostupno na: https://hrcak.srce.hr/31998. [Citirano: 20.09.2019.]

Sažetak
In this work, nonlinear and multi-objective mathematical models were developed to determine the process parameters corresponding to optimum weld pool geometry. The objectives of the developed mathematical models are to maximize tensile load (TL), penetration (P), area of penetration (AP) and/or minimize heat affected zone (HAZ), upper width (UW) and upper height (UH) depending upon the requirements.

Ključne riječi
TIG welding; nonlinear mathematical models; central composite design

Hrčak ID: 31998

URI
https://hrcak.srce.hr/31998

[hrvatski]

Posjeta: 1.250 *