Skoči na glavni sadržaj

Izvorni znanstveni članak

Electrochemical process for the manufacturing of titanium alloy matrix composites

V. Soare ; National Research & Development Institute for Nonferrous and Rare Metals – IMNR, Ilfov, Romania
C. Gurgu ; National Research & Development Institute for Nonferrous and Rare Metals – IMNR, Ilfov, Romania
I. Surcel ; National Research & Development Institute for Nonferrous and Rare Metals – IMNR, Ilfov, Romania
M. Burada ; National Research & Development Institute for Nonferrous and Rare Metals – IMNR, Ilfov, Romania
V. I. Soare ; National Research & Development Institute for Nonferrous and Rare Metals – IMNR, Ilfov, Romania


Puni tekst: engleski pdf 938 Kb

str. 151-155

preuzimanja: 717

citiraj


Sažetak

The paper presents a new method for precursors’ synthesis of titanium alloys matrix composites through an electrochemical process in molten calcium chloride. The cathode of the cell was made from metallic oxides powders and reinforcement ceramic particles, which were pressed and sintered into disk form and the anode from graphite. The process occurred at 850 °C, in two stages, at 2,7 / 3,2 V: the ionization of the oxygen in oxides and the reduction with calcium formed by electrolysis of calcium oxide fed in the electrolyte. The obtained composite precursors, in a form of metallic sponge, were consolidated by pressing and sintering. Chemical and structural analyses on composites samples were performed.

Ključne riječi

titanium; composite; oxides; electrochemical reduction

Hrčak ID:

35468

URI

https://hrcak.srce.hr/35468

Datum izdavanja:

1.7.2009.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.344 *