hrcak mascot   Srce   HID

Izvorni znanstveni članak

Microstructure of Al-Zn and Zn-Al Alloys

Željko Skoko ; Physics Department, Faculty of Science, University of Zagreb, P. O. Box 331, 10002 Zagreb, Croatia
Stanko Popović ; Physics Department, Faculty of Science, University of Zagreb, P. O. Box 331, 10002 Zagreb, Croatia
Goran Štefanić ; Ruđer Bošković Institute, P. O. Box 180, 10002 Zagreb, Croatia

Puni tekst: engleski, pdf (7 MB) str. 405-420 preuzimanja: 8.695* citiraj
APA 6th Edition
Skoko, Ž., Popović, S. i Štefanić, G. (2009). Microstructure of Al-Zn and Zn-Al Alloys. Croatica Chemica Acta, 82 (2), 405-420. Preuzeto s https://hrcak.srce.hr/39658
MLA 8th Edition
Skoko, Željko, et al. "Microstructure of Al-Zn and Zn-Al Alloys." Croatica Chemica Acta, vol. 82, br. 2, 2009, str. 405-420. https://hrcak.srce.hr/39658. Citirano 03.04.2020.
Chicago 17th Edition
Skoko, Željko, Stanko Popović i Goran Štefanić. "Microstructure of Al-Zn and Zn-Al Alloys." Croatica Chemica Acta 82, br. 2 (2009): 405-420. https://hrcak.srce.hr/39658
Harvard
Skoko, Ž., Popović, S., i Štefanić, G. (2009). 'Microstructure of Al-Zn and Zn-Al Alloys', Croatica Chemica Acta, 82(2), str. 405-420. Preuzeto s: https://hrcak.srce.hr/39658 (Datum pristupa: 03.04.2020.)
Vancouver
Skoko Ž, Popović S, Štefanić G. Microstructure of Al-Zn and Zn-Al Alloys. Croatica Chemica Acta [Internet]. 2009 [pristupljeno 03.04.2020.];82(2):405-420. Dostupno na: https://hrcak.srce.hr/39658
IEEE
Ž. Skoko, S. Popović i G. Štefanić, "Microstructure of Al-Zn and Zn-Al Alloys", Croatica Chemica Acta, vol.82, br. 2, str. 405-420, 2009. [Online]. Dostupno na: https://hrcak.srce.hr/39658. [Citirano: 03.04.2020.]

Sažetak
The change of microstructure of the title alloys with concentration, temperature and applied thermal treatment was studied in situ by XRD. The alloys, having the Zn atomic fraction, x(Zn), from 0.03 to 0.62, were subjected to: (i) rapid quenching from a temperature, Tt, higher than the solid-solution tem-perature, Tss, in water at RT (samples WQ); (ii) slow cooling from Tt to RT (samples SC). The WQ's were solid solutions immediately after quenching, up to x(Zn) ≤ 0.44. For short ageing time, the WQ's contained GP zones, rich in Zn; by a prolonged ageing the WQ's were transformed to a quasi-equilibrium state, containing β precipitates, very rich in Zn. The SC's, also containing β precipitates, were closer to the equilibrium state than the aged WQ's, the microstructure of the latter depended on residual strains, quenched-in vacancies and a non-uniform distribution of β precipitates. Both SC's and prolongedly aged WQ's were slowly heated from RT to Tt and cooled back to RT. Several phenomena were observed in the heating run: a decrease of diffraction line intensities due to enhanced atom vibrations, anisotropy of thermal expansion, change in the precipitate shape, partial or complete dissolution of precipitates, phase transitions, formation of solid solution. In the cooling run, the alloys exhibited a temperature hysteresis in reversal phase transitions. The temperature dependence of microstructure for the SC's was different from that of prolongedly aged WQ's. The sequence of phase transitions, found for the alloys with x(Zn) ≥ 0.44, was not in line with the phase diagram of the Al-Zn system, accepted in literature.

Ključne riječi
Al-Zn alloy; solid solution; precipitation in solid; phase transition; X-ray powder diffraction; differential scanning calorimetry

Hrčak ID: 39658

URI
https://hrcak.srce.hr/39658

Posjeta: 9.106 *