hrcak mascot   Srce   HID

Izvorni znanstveni članak

On the influence of human factor on mechanical properties in aluminium hot extrusion process

I. Peruš ; Faculty of Natural Science and Engineering, University of Ljubljana, Ljubljana, Slovenia
M. Fazarinc ; Faculty of Natural Science and Engineering, University of Ljubljana, Ljubljana, Slovenia
G. Kugler ; Faculty of Natural Science and Engineering, University of Ljubljana, Ljubljana, Slovenia
P. Fajfar ; Faculty of Natural Science and Engineering, University of Ljubljana, Ljubljana, Slovenia

Puni tekst: engleski, pdf (2 MB) str. 87-90 preuzimanja: 284* citiraj
APA 6th Edition
Peruš, I., Fazarinc, M., Kugler, G. i Fajfar, P. (2010). On the influence of human factor on mechanical properties in aluminium hot extrusion process. Metalurgija, 49 (2), 87-90. Preuzeto s https://hrcak.srce.hr/43647
MLA 8th Edition
Peruš, I., et al. "On the influence of human factor on mechanical properties in aluminium hot extrusion process." Metalurgija, vol. 49, br. 2, 2010, str. 87-90. https://hrcak.srce.hr/43647. Citirano 22.09.2019.
Chicago 17th Edition
Peruš, I., M. Fazarinc, G. Kugler i P. Fajfar. "On the influence of human factor on mechanical properties in aluminium hot extrusion process." Metalurgija 49, br. 2 (2010): 87-90. https://hrcak.srce.hr/43647
Harvard
Peruš, I., et al. (2010). 'On the influence of human factor on mechanical properties in aluminium hot extrusion process', Metalurgija, 49(2), str. 87-90. Preuzeto s: https://hrcak.srce.hr/43647 (Datum pristupa: 22.09.2019.)
Vancouver
Peruš I, Fazarinc M, Kugler G, Fajfar P. On the influence of human factor on mechanical properties in aluminium hot extrusion process. Metalurgija [Internet]. 2010 [pristupljeno 22.09.2019.];49(2):87-90. Dostupno na: https://hrcak.srce.hr/43647
IEEE
I. Peruš, M. Fazarinc, G. Kugler i P. Fajfar, "On the influence of human factor on mechanical properties in aluminium hot extrusion process", Metalurgija, vol.49, br. 2, str. 87-90, 2010. [Online]. Dostupno na: https://hrcak.srce.hr/43647. [Citirano: 22.09.2019.]

Sažetak
A non-parametric model was proposed for modelling the influence of different technological and chemical parameters on the mechanical properties of the 6082 aluminium alloys during the hot extrusion process with a special consideration of human factor. It was shown that human factor (influence of process engineers) was important and that it could be efficiently modeled and taken into account by the proposed Conditional Average Estimator (CAE) method. Production might be improved (optimized) by a proper education and/or by eliminating critical process engineers. It was found that the highest values for elongation and yield stress did not coincide with the range of the most frequent combinations of input parameters.

Ključne riječi
hot deformation; neural network; human factor; AA6082 alloy; CAE method

Hrčak ID: 43647

URI
https://hrcak.srce.hr/43647

[hrvatski]

Posjeta: 503 *