hrcak mascot   Srce   HID

Professional paper

Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems

Petr Baron ; The Faculty of Manufacturing Technologies, Technical University of Košice with a seat in Prešov, Štúrova 31, 080 01 Prešov, Slovakia
Ivana Džubáková ; The Faculty of Manufacturing Technologies, Technical University of Košice with a seat in Prešov, Štúrova 31, 080 01 Prešov, Slovakia
Jozef Mikita ; Regada, s.r.o. Prešov, Strojnícka 7, 080 01 Prešov, Slovakia

Fulltext: english, pdf (777 KB) pages 377-381 downloads: 597* cite
APA 6th Edition
Baron, P., Džubáková, I. & Mikita, J. (2010). Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems. Tehnički vjesnik, 17 (3), 377-381. Retrieved from https://hrcak.srce.hr/59653
MLA 8th Edition
Baron, Petr, et al. "Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems." Tehnički vjesnik, vol. 17, no. 3, 2010, pp. 377-381. https://hrcak.srce.hr/59653. Accessed 14 Apr. 2021.
Chicago 17th Edition
Baron, Petr, Ivana Džubáková and Jozef Mikita. "Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems." Tehnički vjesnik 17, no. 3 (2010): 377-381. https://hrcak.srce.hr/59653
Harvard
Baron, P., Džubáková, I., and Mikita, J. (2010). 'Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems', Tehnički vjesnik, 17(3), pp. 377-381. Available at: https://hrcak.srce.hr/59653 (Accessed 14 April 2021)
Vancouver
Baron P, Džubáková I, Mikita J. Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems. Tehnički vjesnik [Internet]. 2010 [cited 2021 April 14];17(3):377-381. Available from: https://hrcak.srce.hr/59653
IEEE
P. Baron, I. Džubáková and J. Mikita, "Parallel approaches in the pre-manufacturing phase - Process of the technical preparation of manufacture and risk assessment of technical systems", Tehnički vjesnik, vol.17, no. 3, pp. 377-381, 2010. [Online]. Available: https://hrcak.srce.hr/59653. [Accessed: 14 April 2021]

Abstracts
The possibility to identify and subsequently to react to the bottlenecks of the new proposed technical systems in pre-manufacturing phase, based on the principle of concurrent engineering, brings a number of positive effects on financial savings by improving the quality of the finished product. An important feature of the new product is that during its technical life it will not be the source of adverse events, whether in the form of injury or harm on other technical system or environment. The process of risk assessment must therefore be an integral part of all creative activities, resulting in a functional, reliable and safe product. These were the reasons for our development team to attempt to create an intelligent computer system that performs the chosen method of risk assessment in close cooperation with the selected computer aided process planning systems (CAPP). The aim of this article is to present a modern process of digital information processing in pre-manufacturing phase in terms of predicting security features of the new system through the knowledge system that we proposed.

Keywords
Concurrent Engineering; risk analysis; risk valuation; technical preparation of production

Hrčak ID: 59653

URI
https://hrcak.srce.hr/59653

[croatian]

Visits: 1.212 *