hrcak mascot   Srce   HID

Preliminary communication

Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt

Miroslav Mikoč ; University of Josip Juraj Strossmayer in Osijek, Civil Engineering Faculty in Osijek, Crkvena 21, 31000 Osijek, Croatia
Dalibor Marković ; Cestar d.o.o. Slavonski Brod, 35000 Slavonski Brod, Croatia

Fulltext: english, pdf (293 KB) pages 505-514 downloads: 667* cite
APA 6th Edition
Mikoč, M. & Marković, D. (2010). Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt. Tehnički vjesnik, 17 (4), 505-514. Retrieved from https://hrcak.srce.hr/62927
MLA 8th Edition
Mikoč, Miroslav and Dalibor Marković. "Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt." Tehnički vjesnik, vol. 17, no. 4, 2010, pp. 505-514. https://hrcak.srce.hr/62927. Accessed 11 Apr. 2021.
Chicago 17th Edition
Mikoč, Miroslav and Dalibor Marković. "Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt." Tehnički vjesnik 17, no. 4 (2010): 505-514. https://hrcak.srce.hr/62927
Harvard
Mikoč, M., and Marković, D. (2010). 'Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt', Tehnički vjesnik, 17(4), pp. 505-514. Available at: https://hrcak.srce.hr/62927 (Accessed 11 April 2021)
Vancouver
Mikoč M, Marković D. Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt. Tehnički vjesnik [Internet]. 2010 [cited 2021 April 11];17(4):505-514. Available from: https://hrcak.srce.hr/62927
IEEE
M. Mikoč and D. Marković, "Influence of slag, fly ash and silica fume on the mechanical and physical properties of asphalt", Tehnički vjesnik, vol.17, no. 4, pp. 505-514, 2010. [Online]. Available: https://hrcak.srce.hr/62927. [Accessed: 11 April 2021]

Abstracts
The paper examines the impact of waste materials: slag, fly ash and silica fume on the physical and mechanical properties of asphalt. Natural aggregate fractions from 4-8 mm and 8-11 mm in asphalt were substituted with blast furnace slag while mineral filler was substituted with fly ash and silica fume. Physical and mechanical properties of thus prepared samples were tested according to Standard HRN EN 12697.

Keywords
asphalt; fly ash; silica fume; slag

Hrčak ID: 62927

URI
https://hrcak.srce.hr/62927

[croatian]

Visits: 1.062 *