Skoči na glavni sadržaj

Izvorni znanstveni članak

Local Squeezing Casting Influence on the Compactness of AlSi10Mg Alloy Castings

Z. Brodarac
P. Mrvar
J. Medved
P. Fajfar


Puni tekst: engleski pdf 2.028 Kb

str. 29-35

preuzimanja: 1.489

citiraj


Sažetak

The aim of the local squeezing casting process examination has been to eliminate the hot spot i.e. the place of potential formation of shrinkage porosity. The influence of variation of process parameters on the density i.e. soundness (compactness) of AlSi10Mg alloy castings has been obtained by the local squeezing process with the pin during gravity casting in the special permanent mould. Local squeezing parameters have been determined on the basis of preliminary investigations of AlSi10Mg alloy: temperature intervals and relevant temperature of singular phases precipitation and the microstructure development at different cooling rates. The temperature interval of performing the local squeezing casting process have been established in which the density values approaching to the theoretic ones have been determined.

Ključne riječi

Al-Si alloy; thermal analysis; microstructure development; local squeezing process; density; compactness

Hrčak ID:

6453

URI

https://hrcak.srce.hr/6453

Datum izdavanja:

12.12.2006.

Posjeta: 2.114 *