Skoči na glavni sadržaj

Prethodno priopćenje

Blasting design for obtaining desired fragmentation

Stjepan Strelec ; University of Zagreb, Faculty of Geotechnical Engineering, Hallerova aleja 7, Varaždin, Croatia
Mario Gazdek orcid id orcid.org/0000-0001-9204-5350 ; University of Zagreb, Faculty of Geotechnical Engineering, Hallerova aleja 7, Varaždin, Croatia
Josip Mesec ; University of Zagreb, Faculty of Geotechnical Engineering, Hallerova aleja 7, Varaždin, Croatia


Puni tekst: engleski pdf 799 Kb

str. 79-96

preuzimanja: 17.536

citiraj


Sažetak

Predictions and analyses of blasted rock mass fragmentation have increased in importance, as primary fragmentation can significantly decrease the cost of crushing and secondary breaking, on condition that the correct geometry of drilling and blasting parameters is used. The article shows the estimation of fragmentation using the "SB" program, which was created by the authors. It also shows calibration of factors given for the quarry "Očura". The resulting calibrated value of the rock enables the quality prognosis of fragmentation in further blasting works with changed drilling geometry. It also facilitates simulation in the program to optimize blasting works in order to get the desired fragmentations of the blasted rock mass.

Ključne riječi

fragmentation prediction; Kuz-Ram model; primary crushing; rock factor; rock factor calibration

Hrčak ID:

65929

URI

https://hrcak.srce.hr/65929

Datum izdavanja:

31.3.2011.

Podaci na drugim jezicima: hrvatski

Posjeta: 18.647 *