hrcak mascot   Srce   HID

Metalurgija, Vol. 54 No. 1, 2015.


Metalurgija,Vol. 54 No. 1
Datum izdavanja: siječnja 2015.

Objavljen na Hrčku: 14. 9. 2014.
Sadržaj Puni tekst
12th International Symposium of Croatian Metallurgical Society, June 19-23, 2016 - FIRST CIRCULAR – CALL FOR PAPERS (str.5-7) engleskipdf 113 KB
Ilija Mamuzić
Ostalo
 
Election assambly of Croatian Metallurgical Society (str.8-8) engleskipdf 138 KB
Ostalo  
Minutes of the Meeting of the Editorial Board of the Journal Metalurgija, June 23, 2014 (str.9-10) engleskipdf 167 KB
Ilija Mamuzić
Ostalo
 
The effects of the metal temperature and wall thickness on flake graphite layer in ductile iron (str.11-14) engleskipdf 326 KB
M. Górny, R. Dańko, M. Holtzer
Izvorni znanstveni članak
 
The influence of the shape of wax pattern on the kinetics of drying of ceramic moulds (str.15-18) engleskipdf 270 KB
J. Zych, J. Kolczyk, Ł. Jamrozowicz
Izvorni znanstveni članak
 
Fatigue behaviour of synthetic nodular cast irons (str.19-22) engleskipdf 391 KB
A. Vaško, L. Trško, R. Konečná
Izvorni znanstveni članak
 
The drying kinetics of protective coatings used on sand molds (str.23-26) engleskipdf 351 KB
Ł. Jamrozowicz, J. Zych, J. Kolczyk
Izvorni znanstveni članak
 
A Flow rate of gas versus the level of gas dispersion in physical model of continuous refining reactor (str.27-30) engleskipdf 408 KB
M. Saternus, T. Merder
Izvorni znanstveni članak
 
Removal of Ni (II) and Cr (VI) ions from aqueous solution using by-product from the production of aluminium (str.31-34) engleskipdf 215 KB
A. Štrkalj, Z. Glavaš, G. Matijašić
Izvorni znanstveni članak
 
Influence of refining treatments on the properties of Al-Si alloys (str.35-38) engleskipdf 238 KB
S. Rzadkosz, J. Zych, M. Piękoś, J. Kozana, A. Garbacz-Klempka, J. Kolczyk, Ł. Jamrozowicz
Izvorni znanstveni članak
 
Possibilities of Fe-RICH phases elimination with using heat treatment in secondary Al-Si-Cu cast alloy (str.39-42) engleskipdf 368 KB
L. Hurtalová, E. Tillová, M. Chalupová
Izvorni znanstveni članak
 
The study and microstructure analysis of zinc and zinc oxide (str.43-46) engleskipdf 489 KB
N. Luptáková, F. Pešlová, J. Kliber
Izvorni znanstveni članak
 
Grain size influences the corrosion and cavitation of Ni3Al intermetallic alloys (str.47-50) engleskipdf 535 KB
D. Zasada, R. Jasionowski, J. Sienkiewicz
Izvorni znanstveni članak
 
Synthesis and characterization of hardened Cu-Fe-Ni-P alloy (str.51-54) engleskipdf 454 KB
G. Brovč, G. Dražič, B. Karpe, I. Djordjević, G. Lojen, B. Kosec, M. Bizjak
Izvorni znanstveni članak
 
Effect of variable load on crack initiation microalloyed steel S 690-QL (str.55-58) engleskipdf 174 KB
M. Burzić, M. Manjgo, J. Bernetič, Z. Burzić, M. Arsić
Izvorni znanstveni članak
 
High frequency fatigue test of IN 718 alloy – microstructure and fractography evaluation (str.59-62) engleskipdf 501 KB
J. Belan
Izvorni znanstveni članak
 
Electrochemical characterisation of X10CrNi 18-8 steel in artificial plasma (str.63-66) engleskipdf 116 KB
J. Przondziono, W. Walke
Izvorni znanstveni članak
 
Vacuum brazing of tools with a thin foil (str.67-70) engleskipdf 245 KB
J. Tušek, A. Skumavc, D. Klobčar
Izvorni znanstveni članak
 
Influence of shielding gas on fume and gas emission during ARC weld brazing of steel sheets with coatings (str.71-74) engleskipdf 260 KB
J. Matusiak, J. Wyciślik
Izvorni znanstveni članak
 
Numerical simulation in roll pass design for bar rolling (str.75-78) engleskipdf 277 KB
S. A. Aksenov, E. N. Chumachenko, I. V. Logashina, T. Kubina
Izvorni znanstveni članak
 
Physical modelling of the plastic working processes of modified Zr-Nb zirconium alloy bars and tubes (str.79-82) engleskipdf 313 KB
A. Kawałek, H. Dyja, A. M. Galkin, K. V. Ozhmegov, M. Knapiński
Izvorni znanstveni članak
 
The effect of condition of the charge surface on the scale adhesion for excess air combustion (str.83-86) engleskipdf 194 KB
J. Boryca, T. Wyleciał, D. Urbaniak
Izvorni znanstveni članak
 
Investigation of the physical parameters of duplex stainless steel (DSS) surface integrity after turning (str.87-90) engleskipdf 290 KB
G. Krolczyk, P. Nieslony, S. Legutko, I. Samardzic
Izvorni znanstveni članak
 
Investigation of selected surface integrity features of duplex stainless steel (DSS) after turning (str.91-94) engleskipdf 250 KB
G. Krolczyk, P. Nieslony, S. Legutko, S. Hloch, I. Samardzic
Izvorni znanstveni članak
 
Strength of briquettes made of Cu concentrate and carbon-bearing materials (str.95-97) engleskipdf 186 KB
B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa, P. Folęga
Prethodno priopćenje
 
Chemometric study of the sinter mixtures used in sinter plants in Poland (str.98-100) engleskipdf 161 KB
A. Smoliński, D. Burchart-Korol, J. Korol
Prethodno priopćenje
 
Comparison of local stress values obtained by two measuring methods on blast furnace shell (str.101-104) engleskipdf 306 KB
P. Bigoš, J. Kuľka, M. Mantič, M. Kopas
Prethodno priopćenje
 
The use of mathematical model of hardness spread in the research on the property of cast-iron molds (str.105-108) engleskipdf 238 KB
P. Kuryło, P. Frankovský, E. Tertel, J. Janek
Prethodno priopćenje
 
Thermal reclamation of the used moulding sands (str.109-112) engleskipdf 804 KB
M. Łucarz
Prethodno priopćenje
 
Behaviour of iron during reduction of slag obtained from copper flash smelting (str.113-115) engleskipdf 197 KB
G. Siwiec, M. Sozańska, L. Blacha, A. Smalcerz
Prethodno priopćenje
 
Effects of a reducer type on copper flash smelting slag decopperisation (str.116-118) engleskipdf 223 KB
B. Oleksiak, J. Lipart, A. Karbownik, R. Burdzik
Prethodno priopćenje
 
Residual stresses in castings produced by press die casting technology (str.119-122) engleskipdf 350 KB
D. Novoselović, I. Budić, I. Samardžić
Prethodno priopćenje
 
Flow and mixing of liquid steel in multi-strand tundish delta type – physical modelling (str.123-126) engleskipdf 458 KB
T. Merder, J. Pieprzyca, M. Warzecha, P. Warzecha
Prethodno priopćenje
 
The influence of steel preheating level in the tundish on the primary structure of a continuously cast ingot (str.127-130) engleskipdf 328 KB
J. Pieprzyca, T. Merder, M. Warzecha, J. Skorupa
Prethodno priopćenje
 
Microstructure of AlSi17Cu5 alloy after overheating over liquidus temperature (str.131-134) engleskipdf 515 KB
J. Piątkowski, R. Wieszała
Prethodno priopćenje
 
Wide – ranging influence of mischmetal on properties of G17CrMo5-5 cast steel (str.135-138) engleskipdf 850 KB
J. Kasińska
Prethodno priopćenje
 
Modeling of MnS precipitation during the crystallization of grain oriented silicon steel (str.139-142) engleskipdf 249 KB
D. Kalisz, P. L. Żak, J. Lelito, M. Szucki, J. S. Suchy, B. Gracz
Prethodno priopćenje
 
Copper matrix composites reinforced with volcanic tuff (str.143-146) engleskipdf 414 KB
J. Mikuła, M. Łach, J. S. Kowalski
Prethodno priopćenje
 
The efficiency of ion nitriding of austenitic stainless steel 304 using the “active screen” (str.147-150) engleskipdf 177 KB
M. Ogórek, S. Skuza, T. Frączek
Prethodno priopćenje
 
Modifications of the chemical composition and microstructure of flash smelting copper slags in the process of their reduction (str.151-153) engleskipdf 274 KB
T. Rzychoń, T. Matuła, B. Chmiela, J. Łabaj, K. Rogóż
Prethodno priopćenje
 
Application of feal intermetallic phase matrix based alloys in the turbine components of a turbocharger (str.154-156) engleskipdf 385 KB
J. Cebulski
Prethodno priopćenje
 
Development of technology of complex aluminum-silicon-chrome alloy with utilization of off grade raw materials (str.157-160) engleskipdf 156 KB
A. Mekhtiev, Ye. Shabanov, A. Issagulov, S. Baissanov, A. Baissanov, D. Issagulova
Prethodno priopćenje
 
The influence of drawing speed on structure changes in high carbon steel wires (str.161-164) engleskipdf 421 KB
M. Suliga, R. Kruzel, T. Garstka, J. Gazdowicz
Prethodno priopćenje
 
The influence of chemical composition on structure of plate X100 after physical simulations of finishing rolling process with accelerated cooling (str.165-168) engleskipdf 493 KB
M. Knapinski, A. Kawalek, B. Koczurkiewicz, T. Garstka
Prethodno priopćenje
 
Application of shape memory alloy (SMA) as actuator (str.169-172) engleskipdf 372 KB
L'. Miková, S. Medvecká - Beňová, M. Kelemen, F. Trebuňa, I. Virgala
Prethodno priopćenje
 
Experimental verification of the shape memory alloy (SMA) spring actuator for application on in-pipe machine (str.173-176) engleskipdf 229 KB
M. Kelemen, I. Virgala, E. Prada, T. Lipták
Prethodno priopćenje
 
Numerical analysis of the cross wedge rolling process (CWR) for a stepped shaft (str.177-180) engleskipdf 224 KB
Z. Pater, A. Tofil, J. Tomczak, T. Bulzak
Prethodno priopćenje
 
Mechanical and corrosion properties of aluminium alloy EN AW 6082 after severe plastic deformation (SPD) (str.181-183) engleskipdf 236 KB
P. Lacková, M. Buršák, T. Kvačkaj, M. Halama
Prethodno priopćenje
 
The influnece of the partial single reduction on mechanical properties wires made from trip steel with 0,43 % C (str.184-186) engleskipdf 282 KB
S. Wiewiórowska, Z. Muskalski
Prethodno priopćenje
 
Contribution to the thermal properties of selected steels (str.187-190) engleskipdf 156 KB
P. Jonšta, I. Vlčková, L'. Krišták, I. Špička, Z. Jonšta
Prethodno priopćenje
 
The influence of heat treatnemnt on the abrasive wear resistnace of a construction and a tool steel (str.191-193) engleskipdf 410 KB
M. Orečný, M. Buršák, J. Viňáš
Prethodno priopćenje
 
Material properties of rubber-cord flexible element of pneumatic flexible coupling (str.194-196) engleskipdf 177 KB
S. Medvecká - Beňová, L'. Miková, P. Kaššay
Prethodno priopćenje
 
Verification of the material properties of the structure elements of compressor station for the needs of their redesign (str.197-200) engleskipdf 562 KB
P. Sivák, I. Delyová, F. Trebuňa
Prethodno priopćenje
 
Using of fluidized-bed jet mill to a super fine comminution of steel composite (str.201-203) engleskipdf 148 KB
D. Urbaniak, C. Kolmasiak, T. Wyleciał
Prethodno priopćenje
 
Determination of substrate log-normal distribution in the AZ91/SICP composite (str.204-206) engleskipdf 238 KB
J. Lelito, P. L. Żak, B. Gracz, M. Szucki, D. Kalisz, P. Malinowski, J. S. Suchy, W. K. Krajewski
Prethodno priopćenje
 
Modified low-cycle fatigue (LCF) test (str.207-210) engleskipdf 240 KB
M. Maj, A. Klasik, K. Pietrzak, D. Rudnik
Prethodno priopćenje
 
DP 600 steel research of dynamic testing (str.211-213) engleskipdf 348 KB
M. Mihaliková, M. Német, V. Girman
Prethodno priopćenje
 
The impact of the steel cord construction on its decline of breaking force after fatigue test in bidirectional bending conditions (str.214-216) engleskipdf 262 KB
R. Kruzel, M. Suliga
Prethodno priopćenje
 
Metallographic and corrosion research of copper from archaeological sites (str.217-220) engleskipdf 417 KB
A. Garbacz-Klempka, S. Rzadkosz, R. Klempka, W. Ossowski
Prethodno priopćenje
 
Experimental identification of piezo actuator characteristic (str.221-223) engleskipdf 269 KB
L'. Miková, M. Kelemen, F. Trebuňa, I. Virgala, S. Medvecká-Beňová
Prethodno priopćenje
 
Influence of material and gear parameters on the safety of gearing in metallurgical industry (str.224-226) engleskipdf 252 KB
S. Medvecká - Beňová, I. Virgala, M. Kelemen, L'. Miková
Prethodno priopćenje
 
The methodology and model for in-process inventories calculation in the conditions of metallurgy production (str.227-230) engleskipdf 196 KB
D. Malindžák, J. Šaderová, D. Vitko, M. Malindžáková, A. Gazda
Prethodno priopćenje
 
Impact of strengthening fluids on roughness of 3D printed models (str.231-234) engleskipdf 397 KB
T. Galeta, G. Šimunović, M. Mazurek
Prethodno priopćenje
 
Shaping the edges using flowdrill technology (str.235-238) engleskipdf 253 KB
W. Matysiak, L. Bernat
Prethodno priopćenje
 
Factors of estimating flatness error as a surface requirement of exploitation (str.239-242) engleskipdf 267 KB
M. Hadžistević, B. Štrbac, V. Spasić Jokić, M. Delić, M. Sekulić, J. Hodolič
Prethodno priopćenje
 
Factors of human resource planning in metallurgical company (str.243-246) engleskipdf 191 KB
A. Samolejová, P. Wicher, M. Lampa, R. Lenort, J. Kutáč, A. Sikorová
Prethodno priopćenje
 
Modelling of outbursts and ejections occurrences during steel production (str.247-250) engleskipdf 392 KB
M. Malindžáková, A. Rosová, V. Baranová, J. Futó
Prethodno priopćenje
 
Stock return, seasonality and asymmetric conditional volatility in steel & iron subsector (str.251-253) engleskipdf 128 KB
V. Chirila, C. Chirila
Prethodno priopćenje
 
Acknowledgement to Reviewers 53 (2014) 1-4 (str.254) engleskipdf 67 KB
Ilija Mamuzić
Zahvala
 
Biohydrometallurgical methods for metals recovery from waste materials (str.255-258) engleskipdf 193 KB
J. Willner, J. Kadukova, A. Fornalczyk, M. Saternus
Pregledni rad
 
Refining processes in the copper casting technology (str.259-262) engleskipdf 129 KB
S. Rzadkosz, M. Kranc, A. Garbacz-Klempka, J. Kozana, M. Piękoś
Pregledni rad
 
The recommendation system knowledge representation and reasoning procedures under uncertainty for metal casting (str.263-266) engleskipdf 264 KB
S. Kluska-Nawarecka, E. Nawarecki, B. Śnieżyński, D. Wilk-Kołodziejczyk
Pregledni rad
 
Analysis of ecological intensity of metallurgical production (str.267-269) engleskipdf 111 KB
K. Janovská, R. Lenort, A. Samolejová, Š. Vilamová, D. Stoch
Pregledni rad
 
Thermo-ecological cost (TEC) evaluation of metallurgical processes (str.270-272) engleskipdf 191 KB
W. Stanek, L. Blacha, M. Szega
Pregledni rad
 
Risk, profitability and value of the leading steel producers on the world capital markets (str.273-275) engleskipdf 131 KB
I. Jonek-Kowalska
Pregledni rad
 
Water scarcity assessment of steel production in national integrated steelmaking route (str.276-278) engleskipdf 101 KB
D. Burchart-Korol, M. Kruczek
Pregledni rad
 
The identification of zones of amplification of disruptions in network supply chains of metallurgic products (str.279-282) engleskipdf 120 KB
M. Kramarz, W. Kramarz
Pregledni rad
 
Innovation in metallurgical waste management (str.283-285) engleskipdf 132 KB
T. Lis, K. Nowacki, M. Żelichowska, H. Kania
Pregledni rad
 
The relation productivity - environment in the context of sustainable development – case study on the Romanian industry (str.286-288) engleskipdf 106 KB
V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad
 
The impact of global crisis on the dominant sectors of the economy at the Romanian industry (str.289-291) engleskipdf 71 KB
V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad
 
Copper alloys in investment casting technology (str.293-296) engleskipdf 260 KB
S. Rzadkosz, J. Zych, A. Garbacz-Klempka, M. Kranc, J. Kozana, M. Piękoś, J. Kolczyk, Ł. Jamrozowicz, T. Stolarczyk
Stručni rad
 
Aspects regarding the use of the industrial wastes as raw materials for the manufacture of building materials (str.297-300) engleskipdf 138 KB
R. G. Popa, L. G. Popescu, T. A. Abagiu, C. Popescu, R. Cazalbasu
Stručni rad
 
Research perspectives in the field of acoustic treatment of liquid alloys of iron (str.301-303) engleskipdf 186 KB
K. Nowacki
Stručni rad
 
Return on shares of steel companies under the influence of mergers and acquisitions (str.304-306) engleskipdf 185 KB
J. Zuzik, R. Weiss, E. Weiss, L. Mixtaj, A. Kiraly
Stručni rad
 
Survey of 11th International Symposium of Croatian Metallurgical Society, SHMD '2014 (str.307-308) engleskipdf 157 KB
Ilija Mamuzić
Ostalo
 
Posjeta: 90.484 *