hrcak mascot   Srce   HID

Metalurgija, Vol. 54 No. 2, 2015.


Metalurgija,Vol. 54 No. 2
Datum izdavanja: travnja 2015.

Objavljen na Hrčku: 25. 10. 2014.
Sadržaj Puni tekst
Thermal analysis and kinetics of the chalcopyrite-pyrite concentrate oxidation process (str.311-314) engleskipdf 151 KB
A. Mitovski, N. Štrbac, D. Manasijević, M. Sokić, A. Daković, D. Živković, Lj. Balanović
Izvorni znanstveni članak
 
Analysis of modern methods of assessing the quality of sand foundry moulds (str.315-318) engleskipdf 280 KB
K. Smyksy, J. Zych, T. Snopkiewicz
Izvorni znanstveni članak
 
Setting temperature for thermal reclamation of used moulding sands on the basis of thermal analysis (str.319-322) engleskipdf 328 KB
M. Łucarz
Izvorni znanstveni članak
 
Application of thermodynamic calculations in the research of cast irons structure (str.323-326) engleskipdf 175 KB
J. Hampl, T. Elbel, T. Valek
Izvorni znanstveni članak
 
Analysis of the effects of electromagnetic stirring on solidification structure of bearing steel (str.327-330) engleskipdf 224 KB
B. Wang, Z. G. Yang, X. F. Zhang, Y. T. Wang, C. P. Nie, Q. Liu, H. B. Dong
Izvorni znanstveni članak
 
Numerical model of the diode laser overlapped remelting of structural steel (str.331-334) engleskipdf 536 KB
H. Chmelíčková, H. Šebestová, M. Havelková, H. Hiklová, J. Tomáštík
Izvorni znanstveni članak
 
Effect of microstructure on tensile properties of austenite-ferrite welded joint (str.335-338) engleskipdf 613 KB
R. Bakić, M. O. Abukresh, A. Sedmak, I Samardžić, R. Jovičić
Izvorni znanstveni članak
 
Studies of the quality and cost-effectiveness of a novel concept of open-die forged powerplant main shaft (str.339-342) engleskipdf 299 KB
P. Skubisz, Ł. Lisiecki, J. Sińczak
Izvorni znanstveni članak
 
Flank wear and surface roughness in end milling of hardened steel (str.343-346) engleskipdf 399 KB
S. Jozić, D. Bajić, A. Stoić
Izvorni znanstveni članak
 
Determination of electrical properties of materials used in microwave heating of foundry moulds and cores (str.347-349) engleskipdf 178 KB
B. Opyd, K. Granat, D. Nowak
Prethodno priopćenje
 
Influence of waxes remelting used in investment casting on their thermal properties and linear shrinkage (str.350-352) engleskipdf 218 KB
K. Grzeskowiak, D. Czarnecka-Komorowska, K. Sytek, M. Wojciechowski
Prethodno priopćenje
 
Examination and analysis of influence of compaction degree on dielectricproperties of moulding sand components (str.353-356) engleskipdf 250 KB
D. Nowak, K. Granat, B. Opyd
Prethodno priopćenje
 
Modelling of non-metallic particles motion process in foundry alloys (str.357-360) engleskipdf 258 KB
P. L. Żak, D. Kalisz, J. Lelito, M. Szucki, B. Gracz, J. S. Suchy
Prethodno priopćenje
 
An attempt to use the coherence function for testing the structure of saturated composite castings (str.361-364) engleskipdf 326 KB
A. Bejger, K. Gawdzińska
Prethodno priopćenje
 
Parameters of a gas-solids JET in pneumatic powder injection into liquid alloys with a non-submerged lance (str.365-367) engleskipdf 202 KB
J. Jezierski, K. Janerka
Prethodno priopćenje
 
Reduction of chromium oxides with calcium carbide during thestainless steelmaking process (str.368-370) engleskipdf 228 KB
B. Arh, F. Vode, F. Tehovnik, J. Burja
Prethodno priopćenje
 
Submerged entry nozzle clogging during continuous casting of Al-killed steel (str.371-374) engleskipdf 331 KB
F. Tehovnik, J. Burja, B. Arh, M. Knap
Prethodno priopćenje
 
Modelling of the crystallization front – particles interactions in ZnAl/(SiC)p composites (str.375-378) engleskipdf 150 KB
M. Szucki, D. Kalisz, J. Lelito, P. L. Żak, J. S. Suchy, K. W. Krajewski
Prethodno priopćenje
 
Microstructural characterisation of chromium slags (str.379-382) engleskipdf 297 KB
J. Burja, F. Tehovnik, F. Vode, B. Arh
Prethodno priopćenje
 
Researches and studies regarding brazed aluminium alloys microstructure used in aeronautic industry (str.383-386) engleskipdf 636 KB
A. Dimitrescu, D. F. Niţoi, D. Dobrotă, Z. Apostolescu
Prethodno priopćenje
 
Welding defects at friction stir welding (str.387-389) engleskipdf 269 KB
P. Podržaj, B. Jerman, D. Klobčar
Prethodno priopćenje
 
Influence of parameters of welding regime on metallographic structure of materials from a joint welded in corner in „T” form (str.390-394) engleskipdf 568 KB
V. Petrescu, D. Dobrotă
Prethodno priopćenje
 
Researches on corrosion cracking phenomenon that occurs on welded of agricultural equipment (str.395-398) engleskipdf 239 KB
I. Sărăcin, G. Paraschiv, O. Pandia, I. Bozgă, D. Toma
Prethodno priopćenje
 
The possibility of tribopair lifetime extending by welding of quenched and tempered stainless steel with quenched and tempered carbon steel (str.399-402) engleskipdf 350 KB
V. Marušić, I. Samardžić, I. Budić, L. Marušić
Prethodno priopćenje
 
Dependence of hardness and impact energy on cooling time Δt8/5and temperature for S960QL (str.403-406) engleskipdf 185 KB
I. Samardžić, M. Dunđer, T. Vuherer
Prethodno priopćenje
 
Photoluminescence and concentration quenching of Pr3+ doped BaTa2O6 phosphor (str.407-410) engleskipdf 273 KB
M. Ilhan, R. Samur, H. Demirer, F. Mindivan
Prethodno priopćenje
 
Bond strength of plasma sprayed ceramic coatings on the phosphated steels (str.411-414) engleskipdf 267 KB
P. Pokorny, L. Mastny, V. Sykora, Z. Pala, V. Brozek
Prethodno priopćenje
 
Analysis of the technology of rolling 5,5 mm-diameter wire rod of cold upsetting steel in the morgan block mill (str.415-418) engleskipdf 210 KB
K. Laber, H. Dyja, M. Kałamorz
Prethodno priopćenje
 
Experimental study of rotary compression for hollow parts (str.419-422) engleskipdf 247 KB
Z. Pater, J. Tomczak, T. Bulzak
Prethodno priopćenje
 
Analysis of shear deformation scheme efficiency in plastic structure formation processes (str.423-425) engleskipdf 219 KB
G. I. Raab, A. G. Raab, V. G. Shibakov
Pregledni rad
 
Competitiveness and sustainability – a modern economic approach to the industrial policy (str.426-428) engleskipdf 96 KB
V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad
 
The human role in a progressive trend of foundry automation (str.429-432) engleskipdf 131 KB
A. Misztal, M. Butlewski, A. Jasiak, S. Janik
Pregledni rad
 
Environmental aspects of innovation and new technology implementation in metallurgy industry (str.433-436) engleskipdf 108 KB
I. Kłosok-Bazan, B. Gajdzik, J. Machnik-Słomka, W. Ocieczek
Pregledni rad
 
Economic value added in metallurgy and mining sector in Poland (str.437-440) engleskipdf 139 KB
A. Bluszcz, A. Kijewska, A. Sojda
Pregledni rad
 
Challenges of sustainable development in the mining and metallurgy sector in Poland (str.441-444) engleskipdf 113 KB
A. Bluszcz, A. Kijewska
Pregledni rad
 
Metallurgical industry in Romania in the context of the economic crisis (str.445-448) engleskipdf 142 KB
M. Zaharia, A. G. Babucea, A. Bălăcescu, C. I. Răbonţu
Stručni rad
 
Environmental failure mode and effects analysis (FMEA) – a new approach to methodology (str.449-451) engleskipdf 103 KB
M. Roszak, M. Spilka, A. Kania
Stručni rad
 
New additional important information to authors (str.452-452) engleskipdf 108 KB
Ostalo  
Posjeta: 52.819 *