Skoči na glavni sadržaj

Metalurgija , Vol. 54 No. 3, 2015.

  • Datum izdavanja: 01.07.2015.
  • Objavljen na Hrčku: 27.12.2014.

Sadržaj

Puni tekst

Effect of CaO/ SiO2 ratio on viscosity and structure of slag (str. 455-458)

L. Řeháčková, S. Rosypalová, R. Dudek, J. Kukutschová, J. Dobrovská
Izvorni znanstveni članak


Harmless treatment of used foundry sands and dewatered municipal sludge by microwave (str. 459-461)

H. F. Wang, J. J. Lu, K. F. Chen, H. L. Duan
Izvorni znanstveni članak


Analysis of liquid steel flow in a multi-strand tundish using numerical methods (str. 462-464)

P. Warzecha, M. Warzecha, T. Merder
Izvorni znanstveni članak


Physical modeling of oscillation effect on fluid flow in mold (str. 465-468)

H. J. Wu, Y. Xu, Z. R. Huo, F. Yue, P. Y. Lu
Izvorni znanstveni članak


Hot flow stress models of the steel C45 (str. 469-472)

P. Opěla, I. Schindler, P. Kawulok, F. Vančura, R. Kawulok, S. Rusz, T. Petrek
Izvorni znanstveni članak


Effect of deformation on the continuous cooling transformation (CCT) diagram of steel 32CRB4 (str. 473-476)

R. Kawulok, I. Schindler, P. Kawulok, S. Rusz, P. Opěla, Z. Solowski, K. M. Čmiel
Izvorni znanstveni članak


Examination of material manufactured by direct metal laser sintering (DMLS) (str. 477-480)

J. Dobránsky, P. Baron, V. Simkulet, M. Kočiško, J. Ružbarský, E. Vojnová
Izvorni znanstveni članak


Comparative study of cytotoxicity of direct metal laser sintered and cast Co-Cr-Mo dental alloy (str. 481-484)

T. Puskar, A. Lapcevic, S. Arandjelovic, S. Radulovic, I. Budak, Dj. Vukelic, D. Jevremovic
Izvorni znanstveni članak


The use of water atomisation for the production of frits (str. 485-488)

T. Lešer, I. Anžel, A. Goršek
Izvorni znanstveni članak


Thermal stability of phosphate coatings on steel (str. 489-492)

P. Pokorny, P. Szelag, M. Novak, L. Mastny, V. Brozek
Izvorni znanstveni članak


Grain boundaries of M23C6 particles in high chromium creep resistant steels, stability and effect on creep rate (str. 493-495)

D. A. Skobir Balantič, B. Žužek, F. Vodopivec
Izvorni znanstveni članak


Solving depressions formed during production of plastic molding (str. 496-498)

J. Dobránsky, P. Baron, M. Kočiško, L. Běhálek, E. Vojnová
Prethodno priopćenje


Methods of mathematical modeling for evaluation of energy management of blast-furnace plant (str. 499-502)

M. Szega, L. Blacha, W. Stanek
Prethodno priopćenje


Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes (str. 503-506)

A. Bhattacharyya, J. Schenk, G. Rantitsch, C. Thaler, H. Stocker
Prethodno priopćenje


Microscopic investigations of axial zones of continuous casting ingots (str. 507-510)

K. Janiszewski
Prethodno priopćenje


Effects of chills on the solidification pattern of an axial steel cast impeller (str. 515-518)

M. Copur, A. Turan, M. N. Eruslu
Prethodno priopćenje


On the possibility of the reaction (CuMoO4 + C), using the apparent activation energy method (str. 519-522)

A. D. Mekhtiev, A. Alkenova, A. Isagulov, K. Zhumashev, V. Portnov
Prethodno priopćenje


Influence of use of ultrasound on metallographic structure of plated pieces by welding in ultrasonic field (str. 523-526)

Gh. Amza, D. Dobrotă, V. Petrescu, Z. Apostolescu, R. G. Albulescu
Prethodno priopćenje


Influence of vibrations on residual stresses distribution in welded joints (str. 527-530)

I. Samardžić, T. Vuherer, D. Marić, P. Konjatić
Prethodno priopćenje


Influence of use of ultrasound on the mechanical properties of plated pieces by welding in ultrasonic field (str. 531-534)

Gh. Amza, V. Petrescu, D. Dobrotă, Z. Apostolescu, R. G. Albulescu
Prethodno priopćenje


The influence of melted material proprieties over the characteristics of welded jointings made from steel OL 52.4K (str. 535-538)

I. Bozgă, I. Sărăcin, G. Paraschiv, O. Pandia, I. C. Andronie
Prethodno priopćenje


Weldability investigation steel P 91 by weld thermal cycle simulation (str. 539-542)

M. Dunđer, I. Samardžić, T. Vuherer
Prethodno priopćenje


Thermophysical properties of nickel-based cast superalloys (str. 543-546)

R. Przeliorz, J. Piątkowski
Prethodno priopćenje


Analysis of metallographic structure and hardness of aluminum alloy 3L59 from the structure of vulcanization equipment (str. 547-550)

P. Armăşoiu, D. Dobrotă, V. Petrescu
Prethodno priopćenje


NIMONIC 263 microstructure and surface characterization after laser shock peening (str. 551-554)

P. Drobnjak, A. Kovačević, A. Milosavljević, Ž. Radovanović, I. Samardžić
Prethodno priopćenje


Limiting phenomena in a new forming process for two-rib plates (str. 555-558)

A. Dziubińska, A. Gontarz
Prethodno priopćenje


An experimental study on liquid fuel atomization (str. 559-562)

J. Ochman, W. Bialik, S. Gil
Prethodno priopćenje


Benefits and barriers of participation in production networks in a metallurgical cluster - research results (str. 567-570)

S. Saniuk, A. Samolejova, A. Saniuk, R. Lenort
Prethodno priopćenje


Effects of changes in steel industry concentration (str. 571-574)

T. Bobenič, A. Bobenič Hintošová, L. Hliboká, I. Vasková
Prethodno priopćenje


The statistical assessment of financial distress risk in the case of metallurgical companies (str. 575-578)

Ch. B. Balan, I.-B. Robu, E. Jaba
Prethodno priopćenje


The dimensioning of performance in metallurgical industry from Romania (str. 583-586)

G. Dobrotă, M. D. Ungureanu
Pregledni rad


Biodegradable materials as foundry moulding sands binders (str. 591-593)

K. Major - Gabryś
Pregledni rad


Regression analysis as an objective tool of economic management of rolling mill (str. 594-596)

Š. Vilamová, A. Miklošik, R. Kozel, A. Samolejová, M. Piecha, E. Weiss, K. Janovská
Stručni rad


Posjeta: 68.284 *