hrcak mascot   Srce   HID

Metalurgija, Vol. 54 No. 4, 2015.


Metalurgija,Vol. 54 No. 4
Datum izdavanja: listopada 2015.

Objavljen na Hrčku: 26. 4. 2015.
Sadržaj Puni tekst
75. obljetnica života akademika Ilije Mamuzića (str.599-606) hrvatskipdf 289 KB
75th anniversary of life academician Ilija Mamuzić (str.599-606) engleskipdf 289 KB
F. Vodopivec
Životopis
 
The BTEX emission from moulding sands with furan resin dependence on the VOC content and loss on ignition (str.607-610) engleskipdf 201 KB
S. Żymankowska-Kumon
Izvorni znanstveni članak
 
Comparison of steel desulphurisation at homogenisation station with physical modelling results (str.611-614) engleskipdf 178 KB
L. Socha, Z. Hudzieczek, V. Pilka, Z. Piegza
Izvorni znanstveni članak
 
Analysis of microstructure and microtexture in grain-oriented electrical steel (GOES) during manufacturing process (str.615-618) engleskipdf 265 KB
A. Volodarskaja, V. Vodárek, J. Holešinský, Š. Miklušová, O. Žáček
Izvorni znanstveni članak
 
A study of mechanical properties of high manganese steels after different rolling conditions (str.619-622) engleskipdf 300 KB
M. Jabłońska, A. Śmiglewicz
Izvorni znanstveni članak
 
Effect of asymmetric rolling with cone-shaped rolls on microstructure of low-carbon steel (str.623-626) engleskipdf 257 KB
A. D. Mekhtiev, E. M. Azbanbayev, A. Z. Isagulov, A. R. Karipbayeva, Sv. S. Kvon, N. B. Zakariya, N. Z. Yermaganbetov
Izvorni znanstveni članak
 
Numerical analysis of the skew rolling process for main shafts (str.627-630) engleskipdf 218 KB
Z. Pater, J. Tomczak, T. Bulzak
Izvorni znanstveni članak
 
The effect of strain rate on the impact strength of the high-Mn steel (str.631-634) engleskipdf 221 KB
A. Śmiglewicz, M. B. Jabłońska
Izvorni znanstveni članak
 
Structural characteristics of Ni3Al based alloys depending on the preparation conditions (str.635-638) engleskipdf 443 KB
J. Malcharcziková, M. Kursa
Izvorni znanstveni članak
 
Determination of thermophysical and structural properties of nickel super-alloy (str.639-642) engleskipdf 168 KB
S. Zlá, B. Smetana, M. Žaludová, J. Dobrovská, A. Kalup, V. Vodárek, K. Konečná
Izvorni znanstveni članak
 
Using Alloys of Cr-Ni-Co system as metallic bond in powder metallurgy products (str.643-645) engleskipdf 119 KB
A. M. Gazaliyev, Sv. S. Kvon, T. S. Filippova, V. V. Yegorov
Izvorni znanstveni članak
 
Alternative binder for copper concentrate briquetting (str.646-648) engleskipdf 115 KB
J. Łabaj, M. Jodkowski, W. Szeja, J. Helhmann, M. Kozioł
Prethodno priopćenje
 
Increasing the efficiency of production of iron by means of reduction of harmful elements (str.649-652) engleskipdf 107 KB
Š. Vilamová, P. Besta, R. Kozel, M. Piecha, M. Vaněk, A. Samolejová, K. Janovská, M. Čech
Prethodno priopćenje
 
Surface diagnostics of narow plate moulds (str.653-656) engleskipdf 226 KB
R. Frischer, O. Krejcar, J. David
Prethodno priopćenje
 
The evaluation system of surface inequalities and defects of mold’s plates (str.657-659) engleskipdf 228 KB
P. Švec, J. David, R. Garzinová
Prethodno priopćenje
 
Production of magnesium-aluminium bimetallic bars using the explosive cladding method (str.660-662) engleskipdf 176 KB
S. Mróz, G. Stradomski, T. Bajor, A. Zaskórska, A. Gałka
Prethodno priopćenje
 
Surfactant-assisted synthesis of BaTiO3 nanoparticles by micro-emulsion method (str.663-666) engleskipdf 255 KB
J. L. Gao, Y. Zhi, X. F. Ren, Y. H. Liu
Prethodno priopćenje
 
Usage of analytical diagnostics when evaluating functional surface material defects (str.667-670) engleskipdf 156 KB
R. Frischer, J. David, P. Švec, O. Krejcar
Prethodno priopćenje
 
Study of metallic-ceramic composite foams with application of the computer tomograph (str.671-674) engleskipdf 462 KB
K. Gawdzińska
Prethodno priopćenje
 
Advanced approaches to failure mode and effect analysis (FMEA) applications (str.675-678) engleskipdf 125 KB
D. Vykydal, J. Plura, P. Halfarová, P. Klaput
Prethodno priopćenje
 
Choosing the optimum material for making a bicycle frame (str.679-682) engleskipdf 180 KB
C. Rontescu, T. D. Cicic, C. G. Amza, O. Chivu, D. Dobrotă
Prethodno priopćenje
 
Mechanisms of the porosity formation during the fiber laser lap welding of aluminium alloy (str.683-686) engleskipdf 320 KB
J. Wang, G. Z. Wang, C. M. Wang
Prethodno priopćenje
 
Improving durability of hot forging tools by applying hybrid layers (str.687-690) engleskipdf 320 KB
Z. Gronostajski, M. Kaszuba, M. Hawryluk, M. Marciniak, M. Zwierzchowski, A. Mazurkiewicz, J. Smolik
Prethodno priopćenje
 
Finite element analysis of Ti-based knee-joint implant (str.691-694) engleskipdf 242 KB
L. Zach, L. Kunčická, A. Macháčková, P. Růžička, M. Pohludka, J. Juřica
Prethodno priopćenje
 
Reconstruction of 3D models of cast sculptures using close-range photogrammetry (str.695-698) engleskipdf 195 KB
Ž. Santoši, M. Šokac, D. Korolija-Crkvenjakov, B. Kosec, M. Soković, I. Budak
Prethodno priopćenje
 
Employment and other selected personnel attributes in metallurgical and industrial enterprises of different size - research results (str.699-702) engleskipdf 149 KB
A. Pawliczek, A. Samolejova
Prethodno priopćenje
 
A computer simulation-based analysis of supply chains resilience in industrial environment (str.703-706) engleskipdf 150 KB
P. Wicher, D. Staš, M. Karkula, R. Lenort, P. Besta
Prethodno priopćenje
 
Description of structure of Fe-Zn intermetalic compounds present in hot-dip galvanized coatings on steel (str.707-710) engleskipdf 143 KB
P. Pokorny, J. Kolisko, L. Balik, P. Novak
Pregledni rad
 
Development of a rolling technology for twin-roll cast magnesium strips (str.711-714) engleskipdf 374 KB
M. Ullmann, F. Berge, K. Neh, R. Kawalla
Pregledni rad
 
Review of technologies of processing of technogenic products of copper production (str.715-717) engleskipdf 139 KB
A. K. Serikbayeva, A. A. Suieybergenova, F. A. Berdikulova
Pregledni rad
 
A comparative analysis of trade in metallurgical products in 2009 - 2013. Case study: Romania vs. Croatia (str.718-720) engleskipdf 104 KB
C. I. Răbonţu, A. G. Babucea, L. Paliu-Popa, A. Bălăcescu
Pregledni rad
 
The impact of the economic and financial crisis on the evolutionary trend of world crude steel production (str.721-724) engleskipdf 167 KB
L. Paliu-Popa, A. G. Babucea, C. I. Răbonţu, A. Bălăcescu
Pregledni rad
 
Environmental favourable foundries through maintenance activities (str.725-728) engleskipdf 205 KB
A. Saniuk, M. Jasiulewicz-Kaczmarek, A. Samolejova, S. Saniuk, R. Lenort
Pregledni rad
 
Soft restructuring process in metallurgical enterprises in Poland (str.729-732) engleskipdf 194 KB
B. Gajdzik, W. Ocieczek
Pregledni rad
 
Competitiveness and economic-financial performance in the metallurgical industry companies in Romania (str.733-736) engleskipdf 105 KB
M. D. Ungureanu, G. Dobrotă, G. Bălan
Pregledni rad
 
Value added statement (VAS) of mining and metallurgical companies in Poland (str.737-740) engleskipdf 143 KB
A. Kijewska, A. Bluszcz, A. Sojda
Pregledni rad
 
Behavioural determinants of work accidents and absenteeism in a metallurgical enterprise (str.741-744) engleskipdf 186 KB
B. Gajdzik, D. Zwolińska, J. Szymszal
Pregledni rad
 
 
Izvorni znanstveni članak  
Posjeta: 45.831 *