Skoči na glavni sadržaj

Metalurgija , Vol. 55 No. 3, 2016.

  • Datum izdavanja: 01.07.2016.
  • Objavljen na Hrčku: 05.03.2016.

Sadržaj

Puni tekst

The properties of silicon alloyed ferritic ductile irons (str. 293-296)

Z. Glavas, A. Strkalj, A. Stojakovic
Izvorni znanstveni članak


The influence of calcium on technological properties and micropurity of steel castings (str. 297-300)

J. Hampl, J. Odehnal, B. Smetana
Izvorni znanstveni članak


Mathematical model of phase composition diagram of CaO – SiO2 - Fe2O3 - В2О2 system (str. 301-304)

A. Isagulov, A. Akberdin, R. Sultangaziyev, D. Isagulova
Izvorni znanstveni članak


Diagram of equilibrium phase composition of Fe – C – Si – B system (str. 305-308)

A. Isagulov, A. Akberdin, R. Sultangaziyev, A. Kim, V. Kulikov, D. Isagulova
Izvorni znanstveni članak


Study on phosphorus microscopic enrichment regularity of earlier and final slag in double-slag steelmaking (str. 309-312)

C. X. Li, H. Li, H. Lu, W. W. Mao
Izvorni znanstveni članak


Viscosity and electric conductivity of melt system of CaO – Al2O3 - B2O3 (str. 313-316)

A. Akberdin, U. Konurov, A. Kim, A. Isagulov, R. Saitov, R. Sultangaziyev
Izvorni znanstveni članak


Analysis of the effects of an electromagnetic brake (EMBR) on flow behaviors in the large slab continuous casting mold (str. 317-320)

C. J. Xu, X. J. Zhang, J. Li, Z. Y. Wang, L. W. Zhang
Izvorni znanstveni članak


Wetting phenomena of grooves at liquid metal/ceramics interface (str. 321-324)

M. Mihailović, A. Patarić, K. Raić, Z. Gulišija
Izvorni znanstveni članak


Influence of austempering heat treatment on mechanical and corrosion properties of ductile iron samples (str. 325-328)

M. Janjić, H. Avdušinović, Z. Jurković, F. Bikić, S. Savićević
Izvorni znanstveni članak


Development of banded microstructure in 34CrNiMo6 steel (str. 329-332)

A. Nagode, A. Resnik, M. Bizjak, G. Kosec, B. Karpe, I. Budak, B. Kosec, B. Zorc
Izvorni znanstveni članak


The research of modification process of steel Hadfield integrated alloy ferroalumisilicocalcium (Fe-Al-Si-Сa/FASC) (str. 333-336)

A. Z. Issagulov, A. B. Akhmetov, Ye. P. Naboko, G. D. Kusainova, A. A. Kuszhanova
Izvorni znanstveni članak


Bond strength of hot – dip galvanized reinforcement (B500B) with concrete (str. 337-340)

P. Pokorný, D. Dobiáš, M. Vokáč
Izvorni znanstveni članak


Boronized steels with corundum-baddeleyite coatings (str. 341-344)

P. Pokorny, J. Kolisko, P. Bouska, V. Brozek, T. F. Kubatik, L. Mastny
Izvorni znanstveni članak


Comparison of measured and calculated thermophysical properties of nickel super-alloys (str. 345-348)

A. Kalup, S. Zlá, M. Kawuloková, J. Dobrovská, B. Smetana
Izvorni znanstveni članak


Experimental and numerical analysis of a knee endoprosthesis numerical model (str. 349-352)

L. Zach, L. Kunčická, P. Růžička, B. Baghirova
Izvorni znanstveni članak


Microstructural and mechanical characteristics of AlSiMnFe alloy processed by equal channel angular pressing (str. 353-356)

V. A. Andreyachshenko, A. B. Naizabekov
Izvorni znanstveni članak


Transformation kinetics of selected steel grades after plastic deformation (str. 357-360)

R. Kawulok, I. Schindler, P. Kawulok, S. Rusz, P. Opěla, J. Kliber, Z. Solowski, K. M. Čmiel, P. Podolínský, M. Mališ, Z. Vašek, F. Vančura
Izvorni znanstveni članak


The effect of deformation on the change of hydrogen diffusion in C-Mn-Si-P Trip 800 steel (str. 361-364)

P. Váňová, J. Sojka, T. Kulová, V. Vodárek, M. Sozańska, B. Chmiela, J. Lelątko
Izvorni znanstveni članak


Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel (str. 365-368)

P. Kawulok, I. Schindler, R. Kawulok, S. Rusz, P. Opěla, J. Kliber, M. Kawuloková, Z. Solowski, K. M. Čmiel
Izvorni znanstveni članak


Analyses of the reasons for the decreased service time of CrN-coated die for aluminy hot extrusion – a case study (str. 369-374)

P. Fajfar, P. Panjan, M. Terčelj, G. Kugler
Izvorni znanstveni članak


Quality quantification model of basic raw materials (str. 375-378)

Š. Vilamová, P. Besta, R. Kozel, K. Janovská, M. Piecha, A. Levit, M. Straka, M. Šanda
Prethodno priopćenje


Processing of TiO2 from titanium-bearing blast furnace slag as titanium source (str. 379-381)

X. Li, H. H. Yu, Z. H. Fang, Z. G. Yuan, X. X. Xue
Prethodno priopćenje


Effect of cooling rate during solidification on the hard phases of M23C6-type of cast CoCrMo alloy (str. 382-384)

M. Alvarez-Vera, A. Hernández-Rodríguez, M. A. L. Hernández-Rodríguez, A. Juárez Hernández, J. R. Benavides-Trevińo, J. H. García-Duarte
Prethodno priopćenje


New bicomponent binders for foundry moulding sands composed of phenol-furfuryl resin and polycaprolactone (str. 385-387)

K. Major – Gabryś, A. Grabarczyk, St. M. Dobosz, J. Jakubski
Prethodno priopćenje


Studying microstructure of heat resistant steel deoxidized by barium ferrosilicon (str. 388-390)

A. Z. Issagulov, Sv. S. Kvon, V. Y. Kulikov, N. B. Aitbayev
Prethodno priopćenje


Technological parameters of die casting and quality of casting from EN AC46500 alloy (str. 391-394)

Š. Gašpár, J. Paško
Prethodno priopćenje


Prediction of qualitative parameters of slab steel ingot using numerical modelling (str. 395-398)

M. Tkadlečková, K. Michalek, K. Gryc, L. Socha, P. Machovčák
Prethodno priopćenje


Hydraulic properties of ladle slags (str. 399-402)

J. Vlček, R. Švrčinová, J. Burda, M. Topinková, M. Klárová, H. Ovčačíková, D. Jančar, M. Velička
Prethodno priopćenje


Effect of electrolyte temperature on the thickness of anodic aluminium oxide (AAO) layer (str. 403-406)

P. Michal, A. Vagaská, E. Fechová, M. Gombár, D. Kozak
Prethodno priopćenje


Impact of residual elements on zinc quality in the production of zinc oxide (str. 407-410)

N. Luptáková, P. Dymáček, F. Pešlová, Z. Jurković, O. Barborák, J. Stodola
Prethodno priopćenje


Studying laser radiation effect on steel structure and properties (str. 411-413)

A. M. Gazaliyev, A. G. Melnikov, O. V. Lobankova, I. Y. Zykov, Sv. S. Кvon, T. S. Filippova
Prethodno priopćenje


Determination of composition and fluidity of an alloy for impregnating hard alloys on the basis of titanium carbide (str. 414-416)

A. Z. Issagulov, Sv. S. Kvon, V. Yu. Kulikov, T. S. Filippova, G. K. Kоshebayeva, I. I. Yerakhtina
Prethodno priopćenje


Definition of apparent activation energy on DTG curves (str. 417-419)

A. K. Serikbayeva, K. Zhumashev, N. Sh. Janaliyeva, M. Rakhimberdina
Prethodno priopćenje


Thermal conductivity of nickel superalloy MAR-M247 (str. 420-422)

P. Jonšta, P. Koštial, Z. Jonšta, I. Vlčková, T. Kulová
Prethodno priopćenje


Cavitation damages morphology of high-strength low-alloy steel (str. 423-425)

V. Aleksić, M. Dojčinović, Lj. Milović, I. Samardžić
Prethodno priopćenje


The corrosion resistant coating with halloysite nanoparticles (str. 426-428)

A. Z. Issagulov, V. Yu. Kulikov, Y. P. Chsherbakova, T. V. Kovaleva, Sv. S. Kvon
Prethodno priopćenje


Corrosion of the WE43 and MSR-B magnesium alloys in CO2 (str. 429-432)

R. Przeliorz, J. Piątkowski
Prethodno priopćenje


Effect of heat load on structural changes of selected corrosive resistant steels (str. 433-436)

S. Krum, F. Pešlová, J. Kliber
Prethodno priopćenje


Corrosion behaviour of stainless steel in contact with wine and beer (str. 437-440)

V. Alar, B. Runje, F. Ivušić, A. Horvatić, M. Mihaljević
Prethodno priopćenje


Tribocorrosion wear of austenitic and martensitic steels (str. 441-444)

G. Rozing, V. Alar, V. Marušić, I. Samardžić
Prethodno priopćenje


The contribution to coating quality evaluation by statistical methods (str. 445-448)

M. Badida, L. Sobotova, M. Gombar, J. Kmec, D. Kucerka, R. Hrmo
Prethodno priopćenje


Determination of the EOS maragingsteel MS1 material resistance at low temperatures (str. 449-452)

J. Dobránsky, L. Běhálek, P. Baron, M. Kočiško, V. Simkulet, E. Vojnová, J. Briančin
Prethodno priopćenje


Weldability investigation of fine-grained S1100QL steel (str. 453-456)

I. Samardžić, A. Ćorić, M. Dunđer
Prethodno priopćenje


The influence of pieces thickness on metallographic structure of welded joints (str. 457-460)

D. Dobrotă, G. Iacobescu, I. Ghionea, N. Ionescu
Prethodno priopćenje


Susceptibility testing for welding of AlMg alloys intended for extrusion (str. 461-464)

J. Borowski, J. Sulej-Chojnacka, H. Jurczak, D. Leśniak, H. Dyja
Prethodno priopćenje


Research of the ultrasonic testing parts reconditioned by welding (str. 465-468)

C. Petriceanu, D. Dobrotă, C. Rontescu, D. T. Cicic, O. Chivu, O. Teodorescu
Prethodno priopćenje


Friction stir welding (FSW) of aluminium foam sandwich panels (str. 473-476)

M. Bušić, Z. Kožuh, D. Klobčar, I. Samardžić
Prethodno priopćenje


Evaluation of the impact energy of the samples produced by the additive manufacturing technology (str. 477-480)

J. Dobránsky, M. Kočiško, P. Baron, V. Simkulet, L. Běhálek, E. Vojnová, L'. Nováková-Marcinčinová
Prethodno priopćenje


Environmental impact assessement related to metallurgical industry activities (str. 481-484)

D. Cirtina, N. Ionescu, L. M. Cirtina
Prethodno priopćenje


Usage of clustering methods for sequence plan optimization in steel production (str. 485-488)

P. Švec, L. Frischerová, J. David
Prethodno priopćenje


Copper metal foam as an essential construction element of innovative heat exchanger (str. 489-492)

R. Rybár, M. Beer, D. Kudelas, B. Pandula
Prethodno priopćenje


Oxygen activity changing when simulating silicon filtering process (str. 493-496)

A. D. Mekhtiyev, Zh. D. Zholdubayeva, B. D. Issin, V. N. Golovachyova, A. V. Yurchenko, D. K. Issin
Prethodno priopćenje


Leaching refuse after sphalerite mineral for extraction zinc and cobalt (str. 497-499)

S. Brožová, J. Drápala, M. Kursa, P. Pustějovská, S. Jursová
Prethodno priopćenje


Metallurgical brownfields re-use in the conditions of Slovakia – a case study (str. 500-502)

S. Khouri, H. Pavolová, M. Cehlár, T. Bakalár
Prethodno priopćenje


Iron loss in high-power arc steelmaking furnaces (str. 503-506)

V. P. Karasyov, P. V. Kovalev, A. Z. Issagulov, V. Yu. Kulikov, Y. P. Chsherbakova
Pregledni rad


Discussion about magnesium phosphating (str. 507-510)

P. Pokorny, P. Tej, P. Szelag
Pregledni rad


Characteristics and tendencies in the steel industry, globally and regionally (str. 511-514)

G. Bălan, M. D. Ungureanu, G. Dobrotă
Pregledni rad


Model of converter dusts and iron-bearing slurries management in briquetting (str. 515-518)

P. Gara, B. Zwolińska
Pregledni rad


Management coordinations on steel industry in the context of durable development (str. 519-522)

O. Pandia, I. Sărăcin, F. Văduva, I. Oncioiu, M. Ștefan, G. Dobrotă
Pregledni rad


Knowledge-oriented strategies in the metal industry (empirical studies) (str. 523-526)

A. Krawczyk-Sołtys, I. Vozňáková
Pregledni rad


Depletion of abiotic resources in the steel production in Poland (str. 531-534)

D. Burchart-Korol, M. Kruczek
Pregledni rad


Problems of application of measurement system analysis (MSA) in metallurgical production (str. 535-537)

P. Klaput, D. Vykydal, F. Tošenovský, P. Halfarová, J. Plura
Pregledni rad


The United States (U.S.) Steel import crisis and the global production overcapacity till 2016 (str. 538-540)

Gh. H. Popescu, E. Nica, R.-O. Ștefănescu-Mihăilă, G. Lăzăroiu
Pregledni rad


The use of the bottom ashes and of the steelmaking slags in the manufacturing technologies of the building materials (str. 541-544)

L. G. Popescu, R. G. Popa, T. A. Abagiu, L. Anghelescu
Stručni rad


Combining the casting and punching technology (str. 545-548)

Zh. Ashkeyev, B. Sarkenov, A. Isagulov, T. Zhukebaeva, Zh. Bukanov, G. Amangeldina, S. Mashekov
Stručni rad


Posjeta: 97.957 *