hrcak mascot   Srce   HID

Metallurgy, Vol. 55 No. 3, 2016


Metallurgy,Vol. 55 No. 3
Publication date: July 2016

Published on HRČAK: 05 March 2016
Table of contents Full text
The properties of silicon alloyed ferritic ductile irons (str.293-296) englishpdf 299 KB
Z. Glavas, A. Strkalj, A. Stojakovic
Original scientific paper
 
The influence of calcium on technological properties and micropurity of steel castings (str.297-300) englishpdf 106 KB
J. Hampl, J. Odehnal, B. Smetana
Original scientific paper
 
Mathematical model of phase composition diagram of CaO – SiO2 - Fe2O3 - В2О2 system (str.301-304) englishpdf 126 KB
A. Isagulov, A. Akberdin, R. Sultangaziyev, D. Isagulova
Original scientific paper
 
Diagram of equilibrium phase composition of Fe – C – Si – B system (str.305-308) englishpdf 143 KB
A. Isagulov, A. Akberdin, R. Sultangaziyev, A. Kim, V. Kulikov, D. Isagulova
Original scientific paper
 
Study on phosphorus microscopic enrichment regularity of earlier and final slag in double-slag steelmaking (str.309-312) englishpdf 212 KB
C. X. Li, H. Li, H. Lu, W. W. Mao
Original scientific paper
 
Viscosity and electric conductivity of melt system of CaO – Al2O3 - B2O3 (str.313-316) englishpdf 175 KB
A. Akberdin, U. Konurov, A. Kim, A. Isagulov, R. Saitov, R. Sultangaziyev
Original scientific paper
 
Analysis of the effects of an electromagnetic brake (EMBR) on flow behaviors in the large slab continuous casting mold (str.317-320) englishpdf 190 KB
C. J. Xu, X. J. Zhang, J. Li, Z. Y. Wang, L. W. Zhang
Original scientific paper
 
Wetting phenomena of grooves at liquid metal/ceramics interface (str.321-324) englishpdf 244 KB
M. Mihailović, A. Patarić, K. Raić, Z. Gulišija
Original scientific paper
 
Influence of austempering heat treatment on mechanical and corrosion properties of ductile iron samples (str.325-328) englishpdf 299 KB
M. Janjić, H. Avdušinović, Z. Jurković, F. Bikić, S. Savićević
Original scientific paper
 
Development of banded microstructure in 34CrNiMo6 steel (str.329-332) englishpdf 439 KB
A. Nagode, A. Resnik, M. Bizjak, G. Kosec, B. Karpe, I. Budak, B. Kosec, B. Zorc
Original scientific paper
 
The research of modification process of steel Hadfield integrated alloy ferroalumisilicocalcium (Fe-Al-Si-Сa/FASC) (str.333-336) englishpdf 228 KB
A. Z. Issagulov, A. B. Akhmetov, Ye. P. Naboko, G. D. Kusainova, A. A. Kuszhanova
Original scientific paper
 
Bond strength of hot – dip galvanized reinforcement (B500B) with concrete (str.337-340) englishpdf 233 KB
P. Pokorný, D. Dobiáš, M. Vokáč
Original scientific paper
 
Boronized steels with corundum-baddeleyite coatings (str.341-344) englishpdf 318 KB
P. Pokorny, J. Kolisko, P. Bouska, V. Brozek, T. F. Kubatik, L. Mastny
Original scientific paper
 
Comparison of measured and calculated thermophysical properties of nickel super-alloys (str.345-348) englishpdf 153 KB
A. Kalup, S. Zlá, M. Kawuloková, J. Dobrovská, B. Smetana
Original scientific paper
 
Experimental and numerical analysis of a knee endoprosthesis numerical model (str.349-352) englishpdf 183 KB
L. Zach, L. Kunčická, P. Růžička, B. Baghirova
Original scientific paper
 
Microstructural and mechanical characteristics of AlSiMnFe alloy processed by equal channel angular pressing (str.353-356) englishpdf 236 KB
V. A. Andreyachshenko, A. B. Naizabekov
Original scientific paper
 
Transformation kinetics of selected steel grades after plastic deformation (str.357-360) englishpdf 210 KB
R. Kawulok, I. Schindler, P. Kawulok, S. Rusz, P. Opěla, J. Kliber, Z. Solowski, K. M. Čmiel, P. Podolínský, M. Mališ, Z. Vašek, F. Vančura
Original scientific paper
 
The effect of deformation on the change of hydrogen diffusion in C-Mn-Si-P Trip 800 steel (str.361-364) englishpdf 379 KB
P. Váňová, J. Sojka, T. Kulová, V. Vodárek, M. Sozańska, B. Chmiela, J. Lelątko
Original scientific paper
 
Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel (str.365-368) englishpdf 194 KB
P. Kawulok, I. Schindler, R. Kawulok, S. Rusz, P. Opěla, J. Kliber, M. Kawuloková, Z. Solowski, K. M. Čmiel
Original scientific paper
 
Analyses of the reasons for the decreased service time of CrN-coated die for aluminy hot extrusion – a case study (str.369-374) englishpdf 451 KB
P. Fajfar, P. Panjan, M. Terčelj, G. Kugler
Original scientific paper
 
Quality quantification model of basic raw materials (str.375-378) englishpdf 161 KB
Š. Vilamová, P. Besta, R. Kozel, K. Janovská, M. Piecha, A. Levit, M. Straka, M. Šanda
Preliminary communication
 
Processing of TiO2 from titanium-bearing blast furnace slag as titanium source (str.379-381) englishpdf 286 KB
X. Li, H. H. Yu, Z. H. Fang, Z. G. Yuan, X. X. Xue
Preliminary communication
 
Effect of cooling rate during solidification on the hard phases of M23C6-type of cast CoCrMo alloy (str.382-384) englishpdf 193 KB
M. Alvarez-Vera, A. Hernández-Rodríguez, M. A. L. Hernández-Rodríguez, A. Juárez Hernández, J. R. Benavides-Trevińo, J. H. García-Duarte
Preliminary communication
 
New bicomponent binders for foundry moulding sands composed of phenol-furfuryl resin and polycaprolactone (str.385-387) englishpdf 219 KB
K. Major – Gabryś, A. Grabarczyk, St. M. Dobosz, J. Jakubski
Preliminary communication
 
Studying microstructure of heat resistant steel deoxidized by barium ferrosilicon (str.388-390) englishpdf 176 KB
A. Z. Issagulov, Sv. S. Kvon, V. Y. Kulikov, N. B. Aitbayev
Preliminary communication
 
Technological parameters of die casting and quality of casting from EN AC46500 alloy (str.391-394) englishpdf 499 KB
Š. Gašpár, J. Paško
Preliminary communication
 
Prediction of qualitative parameters of slab steel ingot using numerical modelling (str.395-398) englishpdf 233 KB
M. Tkadlečková, K. Michalek, K. Gryc, L. Socha, P. Machovčák
Preliminary communication
 
Hydraulic properties of ladle slags (str.399-402) englishpdf 138 KB
J. Vlček, R. Švrčinová, J. Burda, M. Topinková, M. Klárová, H. Ovčačíková, D. Jančar, M. Velička
Preliminary communication
 
Effect of electrolyte temperature on the thickness of anodic aluminium oxide (AAO) layer (str.403-406) englishpdf 197 KB
P. Michal, A. Vagaská, E. Fechová, M. Gombár, D. Kozak
Preliminary communication
 
Impact of residual elements on zinc quality in the production of zinc oxide (str.407-410) englishpdf 380 KB
N. Luptáková, P. Dymáček, F. Pešlová, Z. Jurković, O. Barborák, J. Stodola
Preliminary communication
 
Studying laser radiation effect on steel structure and properties (str.411-413) englishpdf 298 KB
A. M. Gazaliyev, A. G. Melnikov, O. V. Lobankova, I. Y. Zykov, Sv. S. Кvon, T. S. Filippova
Preliminary communication
 
Determination of composition and fluidity of an alloy for impregnating hard alloys on the basis of titanium carbide (str.414-416) englishpdf 137 KB
A. Z. Issagulov, Sv. S. Kvon, V. Yu. Kulikov, T. S. Filippova, G. K. Kоshebayeva, I. I. Yerakhtina
Preliminary communication
 
Definition of apparent activation energy on DTG curves (str.417-419) englishpdf 188 KB
A. K. Serikbayeva, K. Zhumashev, N. Sh. Janaliyeva, M. Rakhimberdina
Preliminary communication
 
Thermal conductivity of nickel superalloy MAR-M247 (str.420-422) englishpdf 205 KB
P. Jonšta, P. Koštial, Z. Jonšta, I. Vlčková, T. Kulová
Preliminary communication
 
Cavitation damages morphology of high-strength low-alloy steel (str.423-425) englishpdf 372 KB
V. Aleksić, M. Dojčinović, Lj. Milović, I. Samardžić
Preliminary communication
 
The corrosion resistant coating with halloysite nanoparticles (str.426-428) englishpdf 261 KB
A. Z. Issagulov, V. Yu. Kulikov, Y. P. Chsherbakova, T. V. Kovaleva, Sv. S. Kvon
Preliminary communication
 
Corrosion of the WE43 and MSR-B magnesium alloys in CO2 (str.429-432) englishpdf 331 KB
R. Przeliorz, J. Piątkowski
Preliminary communication
 
Effect of heat load on structural changes of selected corrosive resistant steels (str.433-436) englishpdf 417 KB
S. Krum, F. Pešlová, J. Kliber
Preliminary communication
 
Corrosion behaviour of stainless steel in contact with wine and beer (str.437-440) englishpdf 207 KB
V. Alar, B. Runje, F. Ivušić, A. Horvatić, M. Mihaljević
Preliminary communication
 
Tribocorrosion wear of austenitic and martensitic steels (str.441-444) englishpdf 336 KB
G. Rozing, V. Alar, V. Marušić, I. Samardžić
Preliminary communication
 
The contribution to coating quality evaluation by statistical methods (str.445-448) englishpdf 169 KB
M. Badida, L. Sobotova, M. Gombar, J. Kmec, D. Kucerka, R. Hrmo
Preliminary communication
 
Determination of the EOS maragingsteel MS1 material resistance at low temperatures (str.449-452) englishpdf 345 KB
J. Dobránsky, L. Běhálek, P. Baron, M. Kočiško, V. Simkulet, E. Vojnová, J. Briančin
Preliminary communication
 
Weldability investigation of fine-grained S1100QL steel (str.453-456) englishpdf 426 KB
I. Samardžić, A. Ćorić, M. Dunđer
Preliminary communication
 
The influence of pieces thickness on metallographic structure of welded joints (str.457-460) englishpdf 687 KB
D. Dobrotă, G. Iacobescu, I. Ghionea, N. Ionescu
Preliminary communication
 
Susceptibility testing for welding of AlMg alloys intended for extrusion (str.461-464) englishpdf 185 KB
J. Borowski, J. Sulej-Chojnacka, H. Jurczak, D. Leśniak, H. Dyja
Preliminary communication
 
Research of the ultrasonic testing parts reconditioned by welding (str.465-468) englishpdf 308 KB
C. Petriceanu, D. Dobrotă, C. Rontescu, D. T. Cicic, O. Chivu, O. Teodorescu
Preliminary communication
 
HAZ microstructure in joints made of X13CrMoCoVNbNB9-2-1 (PB2) steel welded with and without post-weld heat treatment (str.469-472) englishpdf 350 KB
M. Łomozik, A. Zielińska-Lipiec
Preliminary communication
 
Friction stir welding (FSW) of aluminium foam sandwich panels (str.473-476) englishpdf 269 KB
M. Bušić, Z. Kožuh, D. Klobčar, I. Samardžić
Preliminary communication
 
Evaluation of the impact energy of the samples produced by the additive manufacturing technology (str.477-480) englishpdf 456 KB
J. Dobránsky, M. Kočiško, P. Baron, V. Simkulet, L. Běhálek, E. Vojnová, L'. Nováková-Marcinčinová
Preliminary communication
 
Environmental impact assessement related to metallurgical industry activities (str.481-484) englishpdf 239 KB
D. Cirtina, N. Ionescu, L. M. Cirtina
Preliminary communication
 
Usage of clustering methods for sequence plan optimization in steel production (str.485-488) englishpdf 142 KB
P. Švec, L. Frischerová, J. David
Preliminary communication
 
Copper metal foam as an essential construction element of innovative heat exchanger (str.489-492) englishpdf 254 KB
R. Rybár, M. Beer, D. Kudelas, B. Pandula
Preliminary communication
 
Oxygen activity changing when simulating silicon filtering process (str.493-496) englishpdf 201 KB
A. D. Mekhtiyev, Zh. D. Zholdubayeva, B. D. Issin, V. N. Golovachyova, A. V. Yurchenko, D. K. Issin
Preliminary communication
 
Leaching refuse after sphalerite mineral for extraction zinc and cobalt (str.497-499) englishpdf 114 KB
S. Brožová, J. Drápala, M. Kursa, P. Pustějovská, S. Jursová
Preliminary communication
 
Metallurgical brownfields re-use in the conditions of Slovakia – a case study (str.500-502) englishpdf 120 KB
S. Khouri, H. Pavolová, M. Cehlár, T. Bakalár
Preliminary communication
 
Iron loss in high-power arc steelmaking furnaces (str.503-506) englishpdf 141 KB
V. P. Karasyov, P. V. Kovalev, A. Z. Issagulov, V. Yu. Kulikov, Y. P. Chsherbakova
Review article
 
Discussion about magnesium phosphating (str.507-510) englishpdf 193 KB
P. Pokorny, P. Tej, P. Szelag
Review article
 
Characteristics and tendencies in the steel industry, globally and regionally (str.511-514) englishpdf 128 KB
G. Bălan, M. D. Ungureanu, G. Dobrotă
Review article
 
Model of converter dusts and iron-bearing slurries management in briquetting (str.515-518) englishpdf 173 KB
P. Gara, B. Zwolińska
Review article
 
Management coordinations on steel industry in the context of durable development (str.519-522) englishpdf 173 KB
O. Pandia, I. Sărăcin, F. Văduva, I. Oncioiu, M. Ștefan, G. Dobrotă
Review article
 
Knowledge-oriented strategies in the metal industry (empirical studies) (str.523-526) englishpdf 125 KB
A. Krawczyk-Sołtys, I. Vozňáková
Review article
 
Integrated risk management in metallurgical enterprises – methodical approach (str.527-530) englishpdf 203 KB
P. Tworek
Review article
 
Depletion of abiotic resources in the steel production in Poland (str.531-534) englishpdf 158 KB
D. Burchart-Korol, M. Kruczek
Review article
 
Problems of application of measurement system analysis (MSA) in metallurgical production (str.535-537) englishpdf 162 KB
P. Klaput, D. Vykydal, F. Tošenovský, P. Halfarová, J. Plura
Review article
 
The United States (U.S.) Steel import crisis and the global production overcapacity till 2016 (str.538-540) englishpdf 174 KB
Gh. H. Popescu, E. Nica, R.-O. Ștefănescu-Mihăilă, G. Lăzăroiu
Review article
 
The use of the bottom ashes and of the steelmaking slags in the manufacturing technologies of the building materials (str.541-544) englishpdf 118 KB
L. G. Popescu, R. G. Popa, T. A. Abagiu, L. Anghelescu
Professional paper
 
Combining the casting and punching technology (str.545-548) englishpdf 226 KB
Zh. Ashkeyev, B. Sarkenov, A. Isagulov, T. Zhukebaeva, Zh. Bukanov, G. Amangeldina, S. Mashekov
Professional paper
 
12. međunarodni simpozij “materijali i metalurgija” – Zbornik sažetaka (str.549-576)  
12th International symposium “Materials and metallurgy” – Book of abstracts (str.549-576) englishpdf 347 KB
Conference paper  
Visits: 47.628 *