Skoči na glavni sadržaj

Metalurgija , Vol. 57 No. 1-2, 2018.

  • Datum izdavanja: 01.01.2018.
  • Objavljen na Hrčku: 14.11.2017.

Sadržaj

Puni tekst

Effect of microwave irradiation on reactivity of metallurgical coke in CO2 atmosphere (str. 19-22)

C. Tian, Q. H. Pang, Z. J. He, J. H. Zhang, X. T. Zhao
Izvorni znanstveni članak


Granularity collocation of single coal on comprehensive combustion of blends (str. 23-26)

X. T. Zhao, Q. H. Pang, Z. J. He, Y. F. Wu, J. H. Zhang
Izvorni znanstveni članak


Experiment study on the effect of iron ore sinter behavior with adding biomass (str. 27-30)

H. Di, Z. J. He, J. H. Zhang, Q. H. Pang
Izvorni znanstveni članak


Structural analysis of CanOn-1S cluster of dolomite desulfurization (str. 31-34)

W. Z. Lv, K. Liu, R. W. Zhang, L. Cheng
Izvorni znanstveni članak


Study of desulfurization with magnesite desulfurizer under hot metal pretreatment (str. 35-38)

G. D. Liu, K. Liu, H. T. Zhang
Izvorni znanstveni članak


Feasibility study on high temperature electrolytic desulfurization in hot metal pretreatment (str. 39-42)

Z. C. Lv, K. Liu, N. Luo, W. Z. Lv
Izvorni znanstveni članak


Study on physical and chemical properties of new desulfurizer magnesite (str. 43-46)

W. Z. Lv, K. Liu, G. Y. Zhang, Z. C. Lv
Izvorni znanstveni članak


NOx and ultrafine particle emission characteristics in a new steel slag modification device (str. 47-50)

J. X. Guo, L. L. Zhang, W. B. Dai, L. Y. Qi, D. Q. Cang
Izvorni znanstveni članak


Optimization of six strand tundish based on inclusions motion (str. 51-54)

Y. Wang, X. Ai, S. Li, H. Li, H. Liu
Izvorni znanstveni članak


Silver recovery from the waste materials by the method of flotation process (str. 59-61)

B. Oleksiak, G. Siwiec, A. Tomaszewska, D. Piękoś
Izvorni znanstveni članak


A study on experiment and numerical simulation of heat exchanger in heating furnace (str. 62-66)

Z. C. Lv, K. Liu, J. W. Qiu, G. Y. Ma, C. P. Liu
Izvorni znanstveni članak


Effect of Ce on stainless steel performance during electroslag remelting (ESR) (str. 67-70)

J. C. Weng, W. J. Shi, H. S. Xie
Izvorni znanstveni članak


Thermogravimetric (TG) investigation on reduction of hematite powder with carbonized corn straw (str. 71-74)

Y. F. Wu, Q. H. Pang, Z. J. He, X. T. Zhao
Izvorni znanstveni članak


Experimental study on iron recovery by microwave carbon heat reduction-magnetic separation from red mud (str. 75-78)

Y. L. Cong, Z. J. He, J. H. Zhang, Q. H. Pang
Izvorni znanstveni članak


Study on clogging mechanism of submerged entry nozzle of steel 38CrMoAl (str. 79-82)

Z. Y. Xu, J. H. Liu, Z. J. He, Q. H. Pang
Izvorni znanstveni članak


Research on the dynamic recrystallization law of cross wedge rolling (CWR) asymmetric hollow shaft (str. 87-90)

S. H. Zheng, X. D. Shu, J. Wei
Izvorni znanstveni članak


Microstructural characteristics of new type γ-γ` Co-9Al-9W cobalt-based superalloys in as-cast state (str. 91-94)

A. Tomaszewska, B. Oleksiak
Izvorni znanstveni članak


Research into oil film coating of a steel pipe interior by oil mist blowing (str. 95-98)

J. Svetlík, J. Buša, T. Brestovič, M. Pituk, A. Pešková, P. Dudová
Izvorni znanstveni članak


Dynamic model of cold strip rolling (str. 99-102)

A. Kozhevnikov, I. Kozhevnikova, N. Bolobanova
Izvorni znanstveni članak


Effect of biomass addition on preparation of ceramsite made by fly ash (str. 103-106)

J. H. Zhang, G. J. Hu, T. X. Xu, Q. Guo, Y. Wang, C. Tian
Izvorni znanstveni članak


Mechanical clinching process stress and strain in the clinching of EN-AW5754 (AlMg3), and EN AW-5019 (AlMg5) metal plates (str. 107-110)

J. Cumin, I. Samardžić, M. Dunđer
Izvorni znanstveni članak


Colouring titanium alloys by anodic oxidation (str. 111-113)

G. Napoli, M. Paura, T. Vela, A. Di Schino
Izvorni znanstveni članak


Simulation analysis of striation phenomena in abrasive water jet cutting (AWJC) process of AISI 304 stainless steel (str. 114-116)

X. C. Chen, S. S. Deng, M. Chen, W. X. Hua, S. Liao, S. Yao
Izvorni znanstveni članak


3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts (str. 117-120)

J. Gonzalez-Gutierez, D. Godec, R. Guráň, M. Spoerk, C. Kukla, C. Holzer
Izvorni znanstveni članak


An experimental investigation into the impact of vibration on the surface roughness and its defects of Al6061-T6 (str. 121-124)

N. Zeelanbasha, V. Senthil, B. Sharon Sylvester
Izvorni znanstveni članak


Influence of ploughshare surface layers on ploughing efficiency (str. 125-127)

Z. Horvat, V. Marušić, I. Samardžić, I. Opačak
Izvorni znanstveni članak


Investigation the impact of a laser on the chernov-luders lines in the 40X9C2 steel (str. 128-130)

A. Z. Issagulov, I. Yu Zykov, A. G. Melnikov, O. V. Lobankova, I. S. Makogon, S. A. Bojok, S. K. Arinova
Prethodno priopćenje


The required competencies of project managers in metallurgical companies in the Czech Republic (str. 131-134)

J. Kostalova, M. Bednarikova, M. Patak
Prethodno priopćenje


Boron microadditives effect on heat resisting properties of Cr-Ni-Fe based alloy (str. 139-141)

M. K. Ibatov, A. Z. Issagulov, Sv. S. Kvon, V. Yu. Kulikov, S. K. Arinova
Prethodno priopćenje


Joining materials by metalock repair method (str. 142-144)

M. Krneta, I. Samardžić, Ž. Ivandić, Marić
Stručni rad


Posjeta: 49.312 *