Skoči na glavni sadržaj

Metalurgija , Vol. 58 No. 1-2, 2019.

  • Datum izdavanja: 01.01.2019.
  • Objavljen na Hrčku: 09.10.2018.

Sadržaj

Puni tekst

Optimization analysis based on intelligent control of the process of the blast furnace (str. 7-10)

C. N. Zhang, Y. R. Li
Izvorni znanstveni članak


Thermodynamic simulation of reduction of mixtures of iron ore, siderurgical wastes and coal (str. 11-14)

M. Lara, J. Camporredondo, A. Garcia, L. Castruita, F. Equihua, H. Moreno, M. Corona
Izvorni znanstveni članak


The study on the interface reaction characteristics of different binary slag, CaO – MgO, Al2O3 – CaO, Al2O3 – MgO, SiO2 – CaO, SiO2 - MgO (str. 15-18)

R. R. Yin, Z. J. He, S. Qiu, J. H. Liu, C. Tian, Y. Q. Yuan, J. H. Zhang
Izvorni znanstveni članak


Mathematical model of charts melt viscosity of the СаО - SiO2 - Al2O3 – MgО (str. 19-21)

A. Akberdin, A. Kim, R. Sultangaziyev
Izvorni znanstveni članak


Numerical simulation research on the influence of steel ingot of 76 tons and 8 corners with hollow riser (str. 22-24)

G. W. Ao, M. G. Shen, Z. S. Zang, C. Y. Wen
Izvorni znanstveni članak


Study on interface reaction characteristics between different acidity and alkalinity slag (str. 25-28)

S. Qiu, J. H. Liu, Z. J. He, H. Di, C. Tian, R. R. Yin, J. H. Zhang
Izvorni znanstveni članak


Simulation study on influence of exothermic riser on ingot solidification (str. 33-35)

K. F. Ji, M. G. Shen, R. T. Li, X. L. Zhu, Z. S. Zhang
Izvorni znanstveni članak


Calculation of heat transfer coefficients (str. 36-38)

F. Vode, F. Tehovnik, B. Arh, S. Malej, B. Podgornik
Izvorni znanstveni članak


Study on the behavior of magnesium in molten salt electrolysis in-situ desulfurization during hot metal pretreatment (str. 39-42)

L. Cheng, K. Liu, R. Z. Han, N. Luo
Izvorni znanstveni članak


Simulation research on molten steel flowing behavior in wide slab continuous casting mold (str. 43-46)

X. Huang, L. H. Feng, W. D. Diao
Izvorni znanstveni članak


Study on the influence of new riser structure on the quality of steel ingot (str. 47-50)

M. G. Shen, Y. J. Liu, X. L. Zhu, Z. Y. Xiao, Y. C. Liu
Izvorni znanstveni članak


Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting (str. 51-54)

P. T. Iswanto, Akhyar, E. U. K. Maliwemu
Izvorni znanstveni članak


Study on the process of preparing Al-Ce alloy by electrodeposition (str. 63-66)

J. D. Li, H. Ren, Z. Gong, K. Wang, Y. Y. Wang, J. L. Lu, J. Li
Izvorni znanstveni članak


Tuning resistivity and transmittance of AZO films through the electro-chemical treatment (str. 67-70)

Y. X. Wang, H. Yin, Y. H. Yang, Y. S. Jiang, Y. Y. Guo, Y. W. Zhou, F. Y. Wu
Izvorni znanstveni članak


Preparation and properties of SiAlON ceramics by gel casting and pressureless sintering (str. 71-74)

J. Li, C. F. Zhang, R. M. Yin, W. H. Zhang
Izvorni znanstveni članak


To the question of the intensification of the processes of uranium extraction from refractory raw materials (str. 75-78)

B. K. Kenzhaliyev, T. Yu. Surkova, A. N. Berkinbayeva
Izvorni znanstveni članak


Study on chloride migration in concrete under pressure (str. 79-82)

X. Z. Li, C. C. Zheng, C. Lou
Izvorni znanstveni članak


Modeling of austenitic grain growth of 21-4N steel (str. 83-86)

H. C. Ji, Y. M. Li, C. J. Ma, H. Y. Long, J. P. Liu, B. Y. Wang
Izvorni znanstveni članak


Analysis of anisotropic hardening in high strength steel (HSS) in line pipes for strain-based applications (str. 95-98)

F. Iob, T. Coppola, A. Di Schino
Izvorni znanstveni članak


Corrosion resistance of 316L stainless steel in fuel cell electrolyte (str. 99-102)

T. T. Chen, S. M. Kang, Y. L. Li
Izvorni znanstveni članak


Creep resisting steels, nanoparticles, interparticles matrix stresses, mobile dislocations motion and creep rate (str. 103-105)

F. Vodopivec, I. Mamuzić, S. Rešković
Izvorni znanstveni članak


Coating properties of electroless Ni-P plating on magnesium alloy with cerium chloride (str. 106-108)

M. L. Xu, S. M. Kang, T. T. Chen
Izvorni znanstveni članak


Evolution of microstructure during hot deformation of INCONEL 625 alloy with different strain rates (str. 113-116)

F. Tehovnik, J. Burja, S. Malej, F. Vode, B. Podgornik, B. Arh, B. Šetina Batič
Izvorni znanstveni članak


Heuristic model for production scheduling wide-strip rolling mill (str. 117-119)

D. Malindžak, E. Mihalikova, B. Pandula
Izvorni znanstveni članak


Analysis of geophysical signals by using hilbert space geometry (str. 120-122)

I. Leššo, B. Pandula, P. Flegner, J. Baulovič, K. Feriančikova
Izvorni znanstveni članak


Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V (str. 127-130)

B. S. Sun, Z. L. Zhao, C. W. Wang
Izvorni znanstveni članak


The quality analysis of multi-step forming the higher D/t cylinder (str. 135-138)

Y. Zhu, X. D. Shu, D. Y. Tian, Y. C. Li
Izvorni znanstveni članak


Analysis of the initial deformabiliti of austenitic stainless stells with a bend test (str. 139-142)

B. Arh, F. Tehovnik, F. Vode, S. Malej, B. Podgornik
Izvorni znanstveni članak


Numerical modeling of induction hardening of gear wheels made of steel AMS 6419 (str. 143-146)

J. Barglik, S. Golak, A. Smalcerz, T. Wieczorek
Prethodno priopćenje


Conditions of the supervised risk in the zinc coating processes (str. 147-150)

T. Karkoszka
Prethodno priopćenje


Developing anticorrosive coating composition with halloysite nanotubes with effect of self-regeneration (str. 151-154)

A. Z. Issagulov, V. Yu. Kulikov, Sv. S. Kvon, A. M. Dostayeva, S. A. Кuripko
Prethodno priopćenje


Vibration impact on properties and parameters of steel ingot porous structure (str. 155-157)

Sv. S. Kvon, V. Yu. Kulikov, A. Z. Issagulov, M. K. Ibatov, A. M. Dostayeva
Prethodno priopćenje


Managing the flow components in supply chains (str. 158-160)

M. Kramarz, W. Kramarz
Pregledni rad


HIGH-SiO2 iron ore sintering: Central & Eastern Europe scenario (str. 161-164)

R. Mežibricky, M. Frohlichova, J. Legemza
Pregledni rad


Managing iron and steel enterprises: study of innovative methods of industrial engineering (logistics approach) (str. 165-168)

V. D. Sekerin, M. N. Dudin, V. I. Gayduk, S. V. Bank, A. E. Gorokhova
Pregledni rad


Posjeta: 55.606 *