hrcak mascot   Srce   HID

Metalurgija, Vol. 60 No. 1-2, 2021.


Metalurgija,Vol. 60 No. 1-2
Datum izdavanja: siječnja 2021.

Objavljen na Hrčku: 15. 11. 2020.
Sadržaj Puni tekst
First circular - call for papers: 15th International Symposium of Croatian Metallurgical Society »Materials and Metallurgy« SHMD `2022 (str.3-5) engleskipdf 173 KB
Ilija Mamuzić
Ostalo
 
Acknowledgement to reviewers, Metalurgija 59(2020)1-4, 1-529 (str.6-6) engleskipdf 121 KB
Ilija Mamuzić
Zahvala
 
Properties of MnO on high Al2O3 slag and its mechanism used for flushing blast furnace (BF) (str.7-10) engleskipdf 1 MB
B. Dai, Y. Ma, H. Long, Y. Ji, J. Rao
Izvorni znanstveni članak
 
Study on cleanliness of interstitial-free (IF) steel continuous casting slab (str.11-14) engleskipdf 1 MB
D. Han, X. Zhu, S. Li, X. Liao, X. Ai
Izvorni znanstveni članak
 
Prediction and analysis of slab quality based on neural network combined with particle swarm optimization (PSO) (str.15-18) engleskipdf 235 KB
Y. R. Li, W. L. Zang
Izvorni znanstveni članak
 
Emergency condition of the operation of a non-symmetric tundish (str.19-22) engleskipdf 565 KB
T. Merder, J. Pieprzyca
Izvorni znanstveni članak
 
Direct reduction and extraction of iron from nickel smelting slag coupling of preparation of cementing materials using gangue composition (str.23-26) engleskipdf 516 KB
R. Shi, Y. Cui, J. Zhao, X. Li, C. Zou, Y. Yu
Izvorni znanstveni članak
 
Effect of modifier and superfine steel slag powder on properties of magnesium oxysulfate (MOS) cement (str.27-29) engleskipdf 242 KB
Z. G. Li, X. S. Zhang, Y. Y. Guo, D. M. Zhang, L. L. Jiang, J. Zhu
Izvorni znanstveni članak
 
Application of metallurgical steel slag in foamed concrete (str.30-32) engleskipdf 619 KB
L. F. Zhang, E. Y. Sun, H. Xu, S. R. Jin, Z. Lv, G. D. Li
Izvorni znanstveni članak
 
Study on flow and temperature drop behavior of six-stream tundish with less-flow casting (str.33-35) engleskipdf 659 KB
D. Han, X. Zhu, S. Li, X. Liao, X. Ai
Izvorni znanstveni članak
 
Theoretical and experimental analysis of the backward extrusion process with a rotational die of AZ31 alloy (str.36-38) engleskipdf 1 MB
P. Szota, S. Mroz, A. Stefanik, K. Laber, R. Mola
Izvorni znanstveni članak
 
Corrosion properties of electrodeposited Cu/Co multilayers (str.39-42) engleskipdf 2 MB
M. Spilka, W. Łoński, R. Babilas
Izvorni znanstveni članak
 
Corrosion fatigue crack propagation of AISI 316L by nitrogen ion implantation in simulated body fluid (str.43-46) engleskipdf 1009 KB
E. U. K. Maliwemu, V. Malau, P. T. Iswanto, I. Kambali, T. Sujitno, Suprapto
Izvorni znanstveni članak
 
The role of residual stress to hardening and cracking on quenched and tempered ARMOR steel welded joints (str.47-50) engleskipdf 765 KB
Yurianto, S. H. Suryo, Syaiful, Y. Umardani, P. Yanuar
Izvorni znanstveni članak
 
Formation mechanism and control of the spiral marks of three-roll skew-rolled hollow axles (str.51-54) engleskipdf 734 KB
S. Zhang, X. D. Shu, Y. X. Xia, J. T. Wang
Izvorni znanstveni članak
 
In situ digital image speckle correlation (DISC) observation of plastic strain increment in low-carbon steel (str.55-58) engleskipdf 766 KB
Yu. Li, S. Barannikova
Izvorni znanstveni članak
 
Kinetics of deformation bands in a low-carbon steel – stainless steel bimetal (str.59-62) engleskipdf 969 KB
S. Barannikova, Yu. Li
Izvorni znanstveni članak
 
A surface defect detection method for rolling magnesium alloy sheet based on computer vision (str.63-66) engleskipdf 413 KB
Y. F. Jiang, X. Zhou, W. Y. Zhang
Izvorni znanstveni članak
 
Influence of plastic deformation inhomogeneity on corrosion resistance of TIN plates (str.67-70) engleskipdf 2 MB
E. Spišak, J. Majernikova, Ľ. Kaščak, J. Slota
Izvorni znanstveni članak
 
Results of thermomechanical treatment implementation in hammer drop forging industrial process (str.71-74) engleskipdf 2 MB
P. Skubisz
Izvorni znanstveni članak
 
Order logistics for discrete and continual production processes in industry 4.0 conditions (str.75-78) engleskipdf 292 KB
D. Malindžak, P. Kačmary, A. Gazda, E. Mihalikova
Izvorni znanstveni članak
 
Copper wire, model and equation of electrical resistance (str.79-81) engleskipdf 450 KB
F. Vodopivec
Izvorni znanstveni članak
 
Melting of ferrosilicon manganese with the use of high ash rock coal as a reducing agent (str.82-84) engleskipdf 173 KB
S. Gabdullin, S. Baisanov, S. Kim, A. Mukhtar
Prethodno priopćenje
 
Hydrometallurgical processing of gold-containing ore and its washed products (str.85-88) engleskipdf 317 KB
P. K. Fedotov, A. E. Senchenko, K. V. Fedotov, A. E. Burdonov
Prethodno priopćenje
 
Experimental melting of high-silicon ferromanganese with the use of ferromanganesian ore and manganese slag (str.89-92) engleskipdf 812 KB
A. Baisanov, Zh. Maishina, A. Isagulov, N. Smagulova, V. Yudakova
Prethodno priopćenje
 
Proposal of a new solution for mold temperature monitoring (str.93-96) engleskipdf 2 MB
J. Dobransky, M. Pollak, M. Kočiško
Prethodno priopćenje
 
Lost pattern complex composition effect on steel casting structure and properties (str.97-100) engleskipdf 2 MB
A. Z. Issagulov, T. V. Kovaleva, Ye. P. Chsherbakova
Prethodno priopćenje
 
Agglomeration of manganese ores and manganese containing wastes of Kazakhstan (str.101-103) engleskipdf 233 KB
A. Zhunusov, L. Tolymbekova, Ye. Abdulabekov, Zh. Zholdubayeva, P. Bykov
Prethodno priopćenje
 
Hot shortness in steels and a novel aprroach (str.104-106) engleskipdf 950 KB
S. Yeşiltepe, M. K. Şeşen
Prethodno priopćenje
 
Phase and structural transformations in foil billet during rolling of helical rollers and longitudinal wedge mill (LWM) (str.107-109) engleskipdf 172 KB
S. A. Mashekov, G. A. Smailova, Zh. S. Abdimuratov, B. A. Nurlybayev, S. A. Orynbayev, A. Zhauyt
Prethodno priopćenje
 
Determination of optimal conditions for autoclave desiliconization of a ZINC product (str.110-112) engleskipdf 286 KB
K. S. Turebekova, G. Burkitseterkyzy, G. L. Katkeyeva, Ye. M. Zhunussov
Prethodno priopćenje
 
Investigation of the kinetics of sulphuric acid leaching of zinc from calamine (str.113-116) engleskipdf 711 KB
R. A. Ramazanova, V. I. Samoilov, N. V. Seraya, G. K. Daumova, E. M. Azbanbaev, R. A. Aubakirova
Prethodno priopćenje
 
Thermodynamic modeling of phase composition for Fe-Ca-Si-Al system (str.117-120) engleskipdf 209 KB
Ye. Makhambetov, N. Timirbayeva, S. Baisanov, A. Baisanov, E. Shabanov
Prethodno priopćenje
 
Research of mechanical stress at tension of quartz optical fiber (QOF) (str.121-124) engleskipdf 1 MB
A. D. Mekhtiyev, A. A. Kovtun, V. V. Yugay, E. G. Neshina, R. Zh. Aimagambetova, A. D. Alkina
Prethodno priopćenje
 
Influence of rolling modes on the anisotropy of sheet metals from carbon steel rolled on the longitudinal wedge mill (LWM) of a new design (str.125-128) engleskipdf 170 KB
S. A. Mashekov, E. A. Tussupkaliyeva, S. A. Akparova, L. R. Kiyanbekova, K. K. Nurakhmetova, B. N. Absadykov
Prethodno priopćenje
 
Shaping workplace safety in the metallurgical industry (str.129-132) engleskipdf 230 KB
M. Spilka
Prethodno priopćenje
 
Risk management system in metallurgical production (str.133-136) engleskipdf 2 MB
T. Karkoszka
Prethodno priopćenje
 
Properties of high-temperature superconductors (HTS) and synthesis technology (str.137-140) engleskipdf 1 MB
S. Tolendiuly, K. Alipbayev, S. Fomenko, A. Sovet, A. Zhauyt
Prethodno priopćenje
 
Simulation modeling of the combined pressing technology of high-quality rods (str.141-144) engleskipdf 195 KB
S. A. Mashekov, E. A. Tussupkaliyeva, A. S. Mashekova, N. T. Smailova
Prethodno priopćenje
 
Research and modeling of the cooling system in steam turbine bearings (str.145-148) engleskipdf 316 KB
A. A. Genbach, V. O. Baibekova, K. S. Olzhabayeva, A. Mergalimova, A. S. Rasmukhametova, A. A. Begimbetova, A. Zhauyt
Prethodno priopćenje
 
Development of rational technology of rods production on a radial-shift mill (RSM) (str.149-152) engleskipdf 218 KB
S. A. Mashekov, E. A. Tussupkaliyeva, Zh. K. Aimurzaeva, B. N. Absadykov, A. Alimbetov
Prethodno priopćenje
 
Crack analysis of crankshaft for diesel engine (str.153-155) engleskipdf 2 MB
D. F. Liu
Prethodno priopćenje
 
Cause analysis of cracks in diesel engine crankshaft blank (str.156-158) engleskipdf 692 KB
S. M. Liu, G. J. Liu
Prethodno priopćenje
 
Study of stress-strain state billets when rolling in a continuous mill of hot-rolled thin stripes using MSC super forge (str.159-161) engleskipdf 1 MB
Y. B. Kaliyev, K. D. Baizhumanov, Z. Zh. Tursymbekova, M. A. Zhumanov, G. A. Smailova, M. M. Azilkiyasheva, A. Zhauyt
Prethodno priopćenje
 
Application methods and selected properties of zinc flake coatings (str.162-164) engleskipdf 339 KB
B. Oleksiak, K. Kołtało, R. Poloczek
Pregledni rad
 
Steel industry in Poland – trends in production, employment and productivity in the period from 2004 to 2019 (str.165-168) engleskipdf 767 KB
B. Gajdzik
Pregledni rad
 
Steel production in Poland with pessimistic forecasts in COVID-19 crisis (str.169-172) engleskipdf 1 MB
B. Gajdzik
Pregledni rad
 
Steel production, consumption and foreign trade in Poland in crises: The financial crisis 2008-2009 and the COVID-19 crisis – first half of 2020 (str.173-176) engleskipdf 502 KB
B. Gajdzik
Pregledni rad
 
Posjeta: 0 *