Skoči na glavni sadržaj

Metalurgija , Vol. 52 No. 4, 2013.

  • Datum izdavanja: 01.10.2013.
  • Objavljen na Hrčku: 02.05.2013.

Sadržaj

Puni tekst

Cooling nozzles characteristics for numerical models of continuous casting (str. 437-440)

R. Pyszko, M. Příhoda, J. Burda, P. Fojtík, T. Kubín, M. Vaculík, M. Velička, M. Čarnogurská
Izvorni znanstveni članak


Influence of thermal treatment on structure and corrosion properties of high manganese triplex steels (str. 441-444)

S. Lasek, E. Mazancová
Izvorni znanstveni članak


Thermal analysis of high temperature phase transformations of steel (str. 445-448)

K. Gryc, B. Smetana, M. Žaludová, K. Michalek, M. Tkadlečková, J. Dobrovská, L. Socha, L. Válek, R. Pachlopnik
Izvorni znanstveni članak


Reduction of longitudinal axial residual stresses in near-root region of circumferential joint of steam pipeline in technological way (str. 449-452)

V. M. Prokhorenko, A. O. Perepichay, I. Mamuzić, A. Čikić
Izvorni znanstveni članak


Research on environmental impact assessment of flame oxyacetylene welding processes (str. 457-460)

Gh. Amza, D. Dobrotă, M. Groza Dragomir, S. Paise, Z. Apostolescu
Izvorni znanstveni članak


Accelerated weldability investigation of TStE 420 steel by weld thermal cycle simulation (str. 461-464)

I. Samardžić, A. Čikić, M. Dunđer
Izvorni znanstveni članak


Thermophysical and thermomechanical properties of selected alloys based on magnesium (str. 473-476)

P. Lichý, J. Beňo, M. Cagala, J. Hampl
Izvorni znanstveni članak


Multidisciplinary analysis of steel plate of variable thickness in view of optimal design (str. 477-480)

M. Đelošević, J. Tepić, R. Doroslovački, V. Gajić, I. Tanackov
Izvorni znanstveni članak


The influence of the carbon content on the machinability of sintered valve plates (str. 481-483)

D. Nadarević, M. Soković
Izvorni znanstveni članak


Evaluation of fluxing agents effect on desulphurization in secondary metallurgy under plant conditions (str. 485-488)

L. Socha, J. Bažan, K. Gryc, P. Machovčák, J. Morávka, P. Styrnal
Prethodno priopćenje


Damping properties of open pore aluminum foams produced by vacuum casting and NaCl dissolution process (str. 489-492)

L. Dahil, A. Karabulut, S. Baspinar
Prethodno priopćenje


Wastes from the coal-enrichment process as alternative reducers for lead smelting from lead-acid accmulator scrap (str. 493-496)

J. Lipart, T. Matuła, M. Niesler, L. Blacha, J. Filipczyk
Prethodno priopćenje


Procurement model for copper and polymer electrical products (str. 501-504)

S. Sremac, J. Tepić, I. Tanackov, G. Stojić, S. Mladenović, B. Matić
Prethodno priopćenje


A model for the pavement temperature prediction at specified depth (str. 505-508)

B. Matić, D. Matić, Đ. Ćosić, S. Sremac, G. Tepić, P. Ranitović
Prethodno priopćenje


Study of interaction between copper and melt of lead-free solders (str. 509-511)

J. Drápala, P. Kubíček, G. Kostiuková, P. Jopek
Prethodno priopćenje


The machinability of nickel-based alloys in high-pressure jet assisted (HPJA) turning (str. 512-514)

D. Kramar, M. Sekulić, Z. Jurković, J. Kopač
Prethodno priopćenje


Recovery of valuable metals from industrial wastes (str. 515-517)

A. K. Serikbayeva, N. Telegusova, B. B. Bekentayev
Prethodno priopćenje


A study on the process of fine-grained plumbiferous material agglomeration (str. 521-524)

M. Niesler, L. Blacha, J. Łabaj, T. Matuła
Prethodno priopćenje


Comparison of methods for physical determination of phase transformations temperatures (str. 525-528)

S. Rusz, T. Kubina, I. Schindler, B. Smetana, P. Kawulok, M. Cagala
Pregledni rad


Use of quality planning methods in optimizing welding wire quality characteristics (str. 529-532)

D. Vykydal, J. Plura, P. Halfarová, R. Fabík, P. Klaput
Pregledni rad


Effects of foundry industry on the environment (str. 533-536)

N. Šehić-Mušić, Š. Goletić, D. Pihura, L. Mušić, K. Hasanović
Pregledni rad


Rail inspection of RCF defects (str. 537-540)

Z. Popović, V. Radović, L. Lazarević, V. Vukadinović, G. Tepić
Pregledni rad


Material and information flows pertaining to aluminum alloy pipe distribution (str. 541-544)

D. Simić, J. Tepić, V. Gajić, I. Kovačević, B. Lalić
Pregledni rad


Functional dependency between the logistics security system and the MySAP ERP in metallurgy (str. 545-548)

P. Ranitović, G. Tepić, B. Matić, S. Sremac, V. Vukadinović
Pregledni rad


The basic principles and rules for heuristic model creation in metallurgy (str. 549-552)

D. Malindžák, A. Gazda, M. Malindžáková, D. Vitko
Pregledni rad


State control over commercial transactions with goods from precious metals (str. 553-556)

I. Bostan, I. Pohoata, C. Lazar
Pregledni rad


Selection of human capital in metallurgical companies using information technology (IT) (str. 557-560)

I. Iancu, T. Socaciu, T. Colomeischi
Pregledni rad


Cooperative business models in steel enterprises in Poland (str. 565-568)

W. Sroka, A. Jabłoński, M. Jabłoński
Pregledni rad


Metastability – Markovian approach (str. 573-576)

I. Tanackov, F. Sinani, V. Bogdanović, Đ. Ćosić, B. Lalić
Pregledni rad


Posjeta: 57.259 *