hrcak mascot   Srce   HID

Metallurgy, Vol. 53 No. 3, 2014


Metallurgy,Vol. 53 No. 3
Publication date: July 2014

Published on HRČAK: 07 April 2014
Table of contents Full text
Comparison of advanced cutting techniques on hardox 500 steel material and the effect of structural properties of the material (str.291-294) englishpdf 938 KB
L. Dahil, İ. Dahil, A. Karabulut
Original scientific paper
 
Determination of solidus and liquidus temperatures for S34MnV steel grade by thermal analysis and calculations (str.295-298) englishpdf 827 KB
K. Gryc, B. Smetana, M. Tkadlečková, M. Žaludová, K. Michalek, L. Socha, J. Dobrovská, K. Janiszewski, P. Machovčák
Original scientific paper
 
Credibility of various plastometric methods in simulation of hot rolling of the steel round bar (str.299-302) englishpdf 1 MB
P. Kawulok, R. Kawulok, I. Schindler, S. Rusz, J. Kliber, P. Unucka, K. M. Čmiel
Original scientific paper
 
Influence of ecologically friendly cores on surface quality of castings based on magnesium alloys (str.303-306) englishpdf 1006 KB
P. Lichý, J. Beňo, P. Lackova, M. Morys
Original scientific paper
 
An experimental gasodynamic study of a model of furnace for ferroalloy production (str.307-310) englishpdf 1 MB
S. Gil, J. Góral, J. Ochman, M. Saternus
Original scientific paper
 
Numerical simulation of sludge influence on horizontal electric in metal pad of aluminum reduction cell (str.311-313) englishpdf 873 KB
W. J. Tao, Z. W. Wang, B. L. Gao, Z. N. Shi, X. W. Hu, J. Z. Cui
Original scientific paper
 
Effects of the Fe/Mn weight ratio and cooling rate on the area fractions of α-AlFeSi and β-AlFeSi phases in Al-7.5Si-3.75Cu-0.5Mg-0.55Fe-xMn aluminum alloy (str.314-316) englishpdf 878 KB
A. Hernández-Rodríguez, M. de J. Castro-Román, M. Herrera-Trejo, S. Belmares-Perales, P. Orozco-González
Original scientific paper
 
Influence of molding and core sands matrix on the effectiveness of the microwaves absorption (str.317-319) englishpdf 952 KB
M. Stachowicz, J. Mażulis, K. Granat, A. Janus
Original scientific paper
 
Exraction and separation of CERIUM(IV)/FLUORINE in fluoride-bearing cerium sulfate solution with fluoride coordination agent (str.320-322) englishpdf 906 KB
Y. Li, J. G. He, X. X. Xue, H. Q. Ru, X. W. Huang, H. Yang
Original scientific paper
 
Validation of numerical model of a liquid flow in a tundish by laboratory measurements (str.323-326) englishpdf 1 MB
T. Merder, M. Saternus, M. Warzecha, P. Warzecha
Original scientific paper
 
Physical modelling of the process of mixing liquid metal in a tundish blown by gas (str.327-330) englishpdf 883 KB
J. Pieprzyca, T. Merder, M. Saternus
Original scientific paper
 
Model investigations 3D of gas-powder two phase flow in descending packed bed in metallurgical shaft furnaces (str.331-334) englishpdf 1 MB
B. Panic, K. Janiszewski
Original scientific paper
 
Weldability of microalloyed high strength steels TStE 420 and S960QL (str.335-338) englishpdf 2 MB
M. Dunđer, T. Vuherer, I. Samardžić
Original scientific paper
 
Industrial investigations of the liquid steel filtration (str.339-342) englishpdf 1 MB
K. Janiszewski, B. Panic
Preliminary communication
 
A study on reduction of copper slag from the flash furnace with the use of anthracite dust (str.343-345) englishpdf 862 KB
G. Siwiec, B. Oleksiak, I. Vaskova, R. Burdzik
Preliminary communication
 
Tempering/ageing in region 50 – 600 °C of quenched and cold deformed 585 GOLD alloy for jewelry production (str.346-348) englishpdf 853 KB
R. Perić, Z. Karastojković, Z. Kovačević, Z. Janjušević, D. Gusković
Preliminary communication
 
The influence of platinum washing-out time on its recovery from used auto catalytic converters (str.349-352) englishpdf 951 KB
A. Fornalczyk, M. Saternus, J. Willner
Preliminary communication
 
Thermodynamic stability of austenitic Ni-Mn-Cu cast iron (str.353-356) englishpdf 930 KB
A. Janus, M. Stachowicz
Preliminary communication
 
Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys (str.357-360) englishpdf 1 MB
I. Szurman, R. Kocich, M. Kursa
Preliminary communication
 
The advantages of using activated flux-cored wire compared to solid wire in the MAG welding process from the aspect of metallurgical characteristics (str.361-364) englishpdf 907 KB
N. Bajić, D. Bajić, D. Veljić, M. Rakin, Z. Janjušević
Preliminary communication
 
Chemical composition analysis of raw materials used in iron ore sinter plants in Poland (str.365-367) englishpdf 820 KB
D. Burchart-Korol, J. Korol, A. Smoliński
Preliminary communication
 
The specification of documentation for anti-dumping investigation in metallurgy using ABC costing method (str.368-370) englishpdf 954 KB
K. Janovská, A. Samolejová, Z. Stefanovová
Preliminary communication
 
Bankruptcy risk forecasting for the metallurgical branch in Romania (str.371-374) englishpdf 772 KB
P. R. Răchişan, S. R. Berinde, C. Boţa-Avram, A. Groşanu
Preliminary communication
 
Determinant factors for the growing of shareholders’ equity in the metallurgical sector in Romania (str.375-378) englishpdf 847 KB
R. S. Berinde, P. R. Răchişan, C. Boţa-Avram, A. Groşanu
Preliminary communication
 
Verification of mathematical models for calculation of viscosity of molten oxide systems (str.379-382) englishpdf 1 MB
S. Rosypalová, L. Řeháčková, J. Dobrovská, R. Dudek, L'. Dobrovský, M. Žaludová, B. Smetana
Review article
 
Coopetition as a development stimulator of enterprises in the networked steel sector (str.383-386) englishpdf 702 KB
J. Cygler, B. Gajdzik, W. Sroka
Review article
 
An assessment of financial audit practices in the Romanian metallurgical industry (str.387-390) englishpdf 880 KB
C. Boţa-Avram, P. R. Răchişan, A. Groşanu
Review article
 
Crisis management in metallurgical enterprises (str.391-394) englishpdf 971 KB
B. Gajdzik
Review article
 
Visits: 34.716 *