Investigation of the influence of MgO and CaO content on the quality of technical ceramics

Authors

  • Amir Fazlić University of Sarajevo, Faculty of Science, Zmaja od Bosne 33-35, 71000 Sarajevo, Bosnia and Herzegovina
  • Zlata Ibrišimović Enker d.d Tešanj, Poslovna Zona Bukva 14, 74260 Tešanj, Bosnia and Herzegovina
  • Zoran Iličković University of Tuzla, Faculty of Technology, Urfeta Vejzagića 8, 75000 Tuzla, Bosnia and Herzegovina https://orcid.org/0000-0002-0081-5504
  • Franc Andrejaš University of Tuzla, Faculty of Technology, Urfeta Vejzagića 8, 75000 Tuzla, Bosnia and Herzegovina https://orcid.org/0000-0002-2607-4724
  • Sabina Begić University of Tuzla, Faculty of Technology, Urfeta Vejzagića 8, 75000 Tuzla, Bosnia and Herzegovina

Keywords:

MgO, CaO, Technical ceramics

Abstract

In this paper, the influence of MgO and CaO content on the quality of technical ceramics (which originally represents the  Al2O3 - SiO2 - CaO - MgO system) has been investigated. Therefore, quality tests were performed on samples where the contents of CaO and MgO were taken as variable values. Based on the obtained test results and their analysis, certain characteristics of ceramics are defined with the different percentages of individual oxides content in 98.2 - 99% Al2O3.

Technologica Acta Vol. 14 No. 1

Downloads

Published

2021-09-22

Issue

Vol. 14 No. 1 (2021)

Section

Articles

Most read articles by the same author(s)