Technical gazette, Vol. 18 No. 3, 2011.
Original scientific paper
Testing of Greenleaf ceramic cutting tools with an interrupted cutting
Robert Čep
orcid.org/0000-0001-9610-4215
; VŠB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Adam Janásek
; VŠB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Jan Valíček
; VŠB - Technical University of Ostrava, Faculty of Mining and Geology, Institute of Physics, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Lenka Čepová
; VŠB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining and Assembly, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Abstract
This paper will be dealing with a solution of ceramic cutting tools availability in interrupted machining. Tests will be provided on fixture - interrupted cut simulator. This fixture was constructed at Department of Machining and Assembly, VŠB – Technical University of Ostrava. Criteria of tool wear are destruction of cutting tool or 6000 shocks. Testing cutting tool material will be Greenleaf GEM-7™ and WG-300® products. Cutting speed (408 m/min and 580 m/min) and cutting feed (0,15 mm, 0,2 mm, 0,25 mm and 0,3 mm) will be variable parameters and cutting depth will be a constant parameter
(ap = 1 mm). The main outputs of the tests will contribute to the wider usage of these cutting materials in interrupted machining. At the present time these materials are advised as cutting inserts for interrupted machining by some producers.
Keywords
machining; interrupted cutting; ceramic cutting tools
Hrčak ID:
71811
URI
Publication date:
26.9.2011.
Visits: 1.925 *