Skoči na glavni sadržaj

Izvorni znanstveni članak

Modification of Heat Exchanger Network Design by Considering Physical Properties Variation

S. H. A. Nejad ; Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, P.O. Box 98164-161, Zahedan, Iran
F. Shahraki ; Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, P.O. Box 98164-161, Zahedan, Iran
M. R. S. Birjandi ; Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, P.O. Box 98164-161, Zahedan, Iran
A. Kovac Kralj ; Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova 17, Maribor, Slovenia
F. Fazlollahi ; Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, P.O. Box 98164-161, Zahedan, Iran


Puni tekst: engleski pdf 2.161 Kb

str. 79-87

preuzimanja: 913

citiraj


Sažetak

The temperature dependency of streams’ physical properties can have a significant effect on heat exchanger networks (HENs) design. An average value can be utilized during each temperature interval in order to determine the physical properties of the streams. Another method is the use of the physical properties’ values, which vary with regard to temperature along each stream. In this paper, the energy targeting for an ammonia plant has already been done before
using both methods, with and without stream segmentation. Pinch temperature, Tmin, and the values of the hot and cold utilities in both cases are different and so the HEN has to be changed. The results demonstrates that when splitting streams into two or more segments within the existing ammonia plant, the pinch point increases by about
3 °C, and hot and cold utilities consumption increases by approximately 23 % and 11 %, respectively. The area of the heat exchanger network also is increased by about 50 %. Finally, an aggregation diagram is introduced for the evaluation of specific heat capacity distribution along the whole streams of the network.

Ključne riječi

Heat exchanger networks; heat integration; pinch technology; physical properties variation; aggregation diagram

Hrčak ID:

83948

URI

https://hrcak.srce.hr/83948

Datum izdavanja:

4.7.2012.

Posjeta: 1.679 *