Izvorni znanstveni članak

INTELLIGENT ADAPTIVE CUTTING FORCE CONTROL IN END-MILLING

U. Zuperl
Franci Čuš
E. Kiker

Sažetak

In this article, an adaptive neural controller for the ball end-milling process is described. Architecture with two different kinds of neural networks is proposed, and is used for the on-line optimal control of the milling process. A BP neural network is used to identify the milling state and to determine the optimal cutting inputs. The feedrate is selected as the optimised variable, and the milling state is estimated by the measured cutting force. The adaptive controller is operated by a PC and the adjusted feedrates are sent to the CNC. The purpose of this article is to present a reliable, robust neural controller aimed at adaptively adjusting feed-rate to prevent excessive tool wear, tool breakage and maintain a high chip removal
rate. The goal is also to obtain an improvement of the milling process productivity by the use of an automatic regulation of the cutting
force. Numerous simulations are conducted to confirm the efficiency of this architecture. The proposed architecture for on-line determining of optimal cutting conditions is applied to ball end-milling in this paper, but it is obvious that the system can be extended to other machines to improve cutting efficiency.

Ključne riječi

end-milling; adaptive force control; neural controller

Hrčak ID:

8842

URI

https://hrcak.srce.hr/8842

Datum izdavanja:

30.6.2006.

Posjeta: 3.302 *