Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/CABEQ.2015.2183

Vapour–Liquid Equilibria in the Polystyrene + Toluene System at Higher Concentrations of Solvent

J. Pavlíček ; Institute of Chemical Process Fundamentals, The Czech Academy of Sciences, Prague, Czech Republic, Rozvojová 135, 165 02 Praha 6, Czech Republic
G. Bogdanić ; Institute of Chemical Process Fundamentals, The Czech Academy of Sciences, Prague, Czech Republic, Rozvojová 135, 165 02 Praha 6, Czech Republic
I. Wichterle orcid id orcid.org/0000-0002-1501-0522 ; Institute of Chemical Process Fundamentals, The Czech Academy of Sciences, Prague, Czech Republic, Rozvojová 135, 165 02 Praha 6, Czech Republic


Puni tekst: engleski pdf 709 Kb

str. 1-4

preuzimanja: 1.139

citiraj


Sažetak

Vapour–liquid equilibria (VLE) were determined in the polystyrene + toluene system under isothermal conditions at 363.15, 373.15, and 383.15 K using an improved all-glass microebulliometer with circulation of the liquid phase for the dynamic measurement of total pressure over liquid mixtures. The experimental data were correlated using the UNIQUAC-free volume model and the applicability of three known predictive models was tested. It was found that prediction of VLE using the GC-Flory equation of state, the UNIFAC-vdw-FV and the Entropic-FV model are of the same quality.

Ključne riječi

vapour–liquid equilibrium; polymer–solvent system; ebulliometer; experimental data; correlation

Hrčak ID:

137548

URI

https://hrcak.srce.hr/137548

Datum izdavanja:

6.4.2015.

Posjeta: 2.086 *