Izvorni znanstveni članak

https://doi.org/10.13044/j.sdewes.2016.04.0014

Defining New Parameters for Green Engineering Design of Treatment Reactors

Susana P. Boeykens orcid.org/0000-0003-2138-3840 ; Laboratorio de Química de Sistemas Heterogéneos, Facultad de Ingeniería, Universidad de Buenos Aires, P. Colon 850 BA, Buenos Aires, Argentina
Néstor Caracciolo ; Laboratorio de Química de Sistemas Heterogéneos, Facultad de Ingeniería, Universidad de Buenos Aires, P. Colon 850 BA, Buenos Aires, Argentina
Cristina Vázquez ; Laboratorio de Química de Sistemas Heterogéneos, Facultad de Ingeniería, Universidad de Buenos Aires, P. Colon 850 BA, Buenos Aires, Argentina

Sažetak

This study proposes a green way to design Plug Flow Reactors (PFR) that use biodegradable polymer solutions, capable of contaminant retaining, for industrial wastewater treatment. Usually, to the design of a reactor, the reaction rate is determined by tests on a Continuous Stirred-Tank (CST), these generate toxic effluents and also increase the cost of the design. In this work, empirical expressions (called “slip functions”), in terms of the average concentration of the contaminant, were developed through the study of the transport behaviour of CrVI into solutions of xanthan gum. “In situ” XRμF was selected as a no-invasive micro-technique to determine local concentrations. Slip functions were used with laboratory experiments planned in similar conditions using Plug Flow Reactors, to obtain useful dimensionless parameters for the industrial design.

Ključne riječi

Wastewater treatments; Biodegradable polymers; Heavy metal contaminants; Polymer retention

Hrčak ID:

160118

URI

https://hrcak.srce.hr/160118

Datum izdavanja:

30.6.2016.

Posjeta: 1.094 *