Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.21278/brod68305

KPI (KEY PERFORMANCE INDICATORS) APPLICATION ON BALLAST WATER TREATMENT SYSTEM SELECTION

Fatma Yonsel orcid id orcid.org/0000-0002-6617-1043 ; Istanbul Technical University, Faculty of Naval Architecture and Ocean Engineering, Department of Shipbuilding and Ocean Engineering, Maslak, 34469 Istanbul/Turkey
Gülçin Vural ; Istanbul Technical University, Faculty of Naval Architecture and Ocean Engineering, Department of Shipbuilding and Ocean Engineering, Maslak, 34469 Istanbul/Turkey


Puni tekst: engleski pdf 516 Kb

str. 67-84

preuzimanja: 950

citiraj


Sažetak

Every day, more than 7,000 different marine species are transferred to different ecosystems via ballast water in ships. The introduction of invasive species can cause problems for native species. After realizing the serious potential problems associated with the transport of organisms in ballast water, national and international regulations were developed. In 2004, the International Maritime Organization introduced the International Convention for the Control and Management of Ships' Ballast Water and Sediments. With these regulations, the problems caused by ballast water have attracted attention and many companies have started to research and develop technologies for the management of ballast water. Today, there are hundreds of different systems for ballast-water treatment, and the selection of the most suitable system for a specific vessel is an increasingly important issue as the Convention nears enforcement on September 8, 2017. The goal of this study is to demonstrate that the application of key performance indicators (KPIs) to the selection of a ballast-water treatment system (BWTS) leads to a very useful tool with which shipyards can compare BWTSs. This allows them to make better choices and to designate the most suitable system for each of their ships. In this study, we examine two types of vessel from a shipyard in Istanbul, Turkey. They have different ballast-water capacities and equipment, and the most suitable system for each is selected by using the KPI method.

Ključne riječi

ballast water; ballast-water treatment systems; KPI; key performance indicators

Hrčak ID:

179616

URI

https://hrcak.srce.hr/179616

Datum izdavanja:

30.9.2017.

Posjeta: 2.116 *