Izvorni znanstveni članak
https://doi.org/10.17559/TV-20140411120832
Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums
Jiří Fries
orcid.org/0000-0001-9776-6878
; VŠB – Technical University of Ostrava, Faculty of Mining and Geology, Institute of clean technologies for mining and utilization of raw materials for energy use, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Tomáš Hapla
; VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Sažetak
Belt slippage on drive drums of belt conveyors is generally considered as an undesirable phenomenon, which has a huge influence on wear of the drive drum lining or its destruction, reduces the operability of the entire device and should be then completely excluded from belt conveyor operation. Belt slips in the start-up phase can be long- or short-lasting with slight differences in speeds of the belt and drive drum and therefore cannot be registered. So it in necessary to seek options to avoid slips in a controlled start-up of belt conveyor. The paper suggests the effects of conveyor input parameters on the occurrence of those negative slips.
Ključne riječi
belt conveyor; drive drum; measuring; lifetime; simulation; slippage; wear
Hrčak ID:
200591
URI
Datum izdavanja:
26.5.2018.
Posjeta: 2.223 *