Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170521194820
Development of Integrated Intelligent Cad System for Design of Shafts
Isad Saric
orcid.org/0000-0001-9228-4191
; University of Sarajevo, Faculty of Mechanical Engineering, Department of Mechanical Design, Vilsonovo setaliste 9, 71000 Sarajevo, Bosnia and Herzegovina
Nedim Pervan
orcid.org/0000-0001-7366-202X
; University of Sarajevo, Faculty of Mechanical Engineering, Department of Mechanical Design, Vilsonovo setaliste 9, 71000 Sarajevo, Bosnia and Herzegovina
Adil Muminovic
; University of Sarajevo, Faculty of Mechanical Engineering, Department of Mechanical Design, Vilsonovo setaliste 9, 71000 Sarajevo, Bosnia and Herzegovina
Mirsad Colic
; University of Sarajevo, Faculty of Mechanical Engineering, Department of Mechanical Design, Vilsonovo setaliste 9, 71000 Sarajevo, Bosnia and Herzegovina
Sažetak
Integrated intelligent CAD systems (IICAD) can be developed for different purposes. The objective of this article is to emphasize the advantages of the use of IICAD systems in comparison with the classic systems. The article shows a structure of one such developed system, namely the IICADv system. This system is used for automatization of activities undertaken during the realization of certain phases of the process of designing of shafts, especially the synthesis phase. The development of a module for computation of the shaft and integration of the entire system was performed in the C# programming language, while shaping of the shaft was performed in the CATIA system. The interlinking was performed thanks to previously modelled basic 3D models. In such way, utilizing the advanced IICADv system, the computation and shaping of the shaft is done almost instantly. The results of the use of the IICADv systems are generated final 3D models of the shaft, ready for use by numerous other applications.
Ključne riječi
CATIA; C#; design; integrated intelligent CAD system; shafts
Hrčak ID:
200604
URI
Datum izdavanja:
26.5.2018.
Posjeta: 2.478 *