Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.21278/brod70104

NUMERICAL SIMULATION OF THE CAVITATING FLOW AROUND MARINE CO-ROTATING TANDEM PROPELLERS

Boucetta Djahida ; Aeronautics and propulsive systems laboratory Department of marine engineering, Faculty of mechanical engineering University of Sciences and Technology of Oran, USTO-MB, Oran, Algeria
Imine Omar ; Aeronautics and propulsive systems laboratory Department of marine engineering, Faculty of mechanical engineering University of Sciences and Technology of Oran, USTO-MB, Oran, Algeria


Puni tekst: engleski pdf 1.110 Kb

str. 43-57

preuzimanja: 1.923

citiraj


Sažetak

In the present paper, a numerical simulation has been carried out to determine the hydrodynamic characteristics in cavitating viscous flow of the conventional INSEAN E779A propeller in single and tandem configuration by using Singhal et al. cavitation model implemented in FLUENT Software. Firstly, calculations have been carried out on single E779A propeller in non-cavitating and cavitating flows. The computed performances have shown good agreement with experimental data. Next, the numerical approach has been applied in loaded conditions to the case of tandem propeller configurations with respectively 0.2 and 0.6 axial displacement. Results reveal that cavitation is qualitatively well predicted and the cavitation area is rather more pronounced on the fore propeller. Te use of tandem co-rotating propeller in loaded conditions is highlighted.

Ključne riječi

Numerical simulation; marine tandem co-rotating propellers; cavitating viscous flow; Singhal et al. cavitation model; open water performances

Hrčak ID:

215069

URI

https://hrcak.srce.hr/215069

Datum izdavanja:

31.3.2019.

Posjeta: 2.618 *