Izvorni znanstveni članak
https://doi.org/10.31534/engmod.2019.2-4.ri.01v
Determination of optimal tool path in drilling operation using Modified Shuffled Frog Leaping Algorithm
A.M. Dalavi
; Department of Mechanical Engineering, Symbiosis Institute of Technology, Symbiosis International University, Gram Lavale, Mulshi, Pune, INDIA
P.J. Pawar
; Department of Production Engineering, K. K. Wagh Institute of Engineering Education and Research, Nashik, INDIA
T.P. Singh
; Department of Mechanical Engineering, Symbiosis Institute of Technology, Symbiosis International University, Gram Lavale, Mulshi, Pune, INDIA
Sažetak
Applications like boilerplates, food-industry processing separator, printed circuit boards, drum and trammel screens, etc. consists of a matrix of a large number of holes. The primary issue involved in hole-making operations is a tool travel time. It is often necessary to find the optimal sequence of operations so that the total processing cost of hole-making operations can be minimized. In this work, therefore an attempt is made to reduce the total tool travel of hole-making operations by applying a relatively new optimization algorithm known as modified shuffled frog leaping for determining the optimal sequence of operations. Modification is made in the existing shuffled frog-leaping algorithm by introducing three parameters with their positive values to widen the search capability of existing algorithms. A case study of the printed circuit board is considered in this work to demonstrate the proposed approach. Obtained results of optimization using modified shuffled frog leaping algorithm are compared with those obtained using particle swarm optimization, firefly algorithm and shortest path search algorithm.
Ključne riječi
Modified Shuffled Frog Leaping Algorithm; tool path; hole-making operations
Hrčak ID:
234625
URI
Datum izdavanja:
21.2.2020.
Posjeta: 1.613 *