Technical gazette, Vol. 27 No. 3, 2020.
Original scientific paper
https://doi.org/10.17559/TV-20190329095201
The Possibility of Increasing the Achromatic Tone Values of FOGRA 51 Standards Achieved by the Modification of in Line Pre-Treatment of the Printing Substrate
Marko Morić
; University Nord, Multimedia, Design and Application, Jurja Križanića 31b, 42000 Varaždin, Croatia
Igor Majnarić
; University of Zagreb, Faculty of Graphic Arts, Getaldićeva 2, 10000 Zagreb, Croatia
Damir Modrić
; University of Zagreb, Faculty of Graphic Arts, Getaldićeva 2, 10000 Zagreb, Croatia
Abstract
For high-quality black & white printing realized with an electrophotography printing machine, it is necessary to prepare the printing substrate. For optimal adhesion of the black liquid electrophotography ink to the printing substrate, it is necessary to apply additional treatment to meet ideal substrate surface tension by means of corona treatment and/or coating with fluid for regulating the surface tension (primer). This paper examines the influence of the corona power and the thickness of used fluid for the regulation of surface tension on the achromatic digital reproduction quality. Within the electrophotography printing process, this implies determining the differences in the colour gamut volume, the structure of characteristic screening elements, the amplitude-modulated screening, and the increase in the number of colour separations. The results show that the optimal colour tone values, colour gamut, and dot gain, high quality of digital prints will be realized without the use of the fluid for the regulation of surface tension and without activation of the corona power. That confirms that the FOGRA values for industrial standards can be used for quality electrophotography printing.
Keywords
corona treatment; ElectroInk; FOGRA PSD; HP Indigo; surface tension regulating fluid
Hrčak ID:
239080
URI
Publication date:
14.6.2020.
Visits: 1.672 *