Original scientific paper
https://doi.org/10.5552/crojfe.2020.663
Storage of Wood Chips: Effect of Chip Size on Storage Properties
Erik Anerud
; Swedish University of Agricultural Science Department of Forest Biomaterials and Technology Forest Biomaterials and Technology SE-901 83 Umeå SWEDEN
Gunnar Larsson
; Department of Energy and Technology Swedish University of Agricultural Science Division of Agricultural Engineering SE-75007 Uppsala SWEDEN
Lars Eliasson
; The Forestry Research Institute of Sweden Uppsala Science Park SE-75183 Uppsala SWEDEN
Abstract
To make forest biomass more competitive, increased efficiency in the handling and supply system is needed, thus producing high-quality fuel at a lower cost. Operating costs can be reduced if the target chip size is increased, as this increases productivity and reduces chipper fuel consumption. However, the chips need to be stored in order to meet fluctuating seasonal demand and maintain high machine utilisation. Due to biomass degradation, storage of comminuted biomass can lead to high energy losses, but can also increase fuel quality, e.g. by reducing moisture content and increasing net calorific value. This study evaluated the effects of storage on dry matter losses and differences in fuel quality of the stored biomass for three target chip sizes and three materials during six months of storage. The results showed that coarse chips had significantly lower moisture content and lower energy losses after storage than fine chips. Overall, changes during storage resulted in an economic loss of 3–4% per oven-dry ton for fine chips, but an economic gain of 2–6% for coarse chips. Thus increased target chip size can increase the competitiveness of forest biomass through decreased production costs and reduced storage costs. It can also ensure higher, more consistent fuel quality.
Keywords
storage, wood fuelchips, coarese wood chips, dry matter loss, fuel quality
Hrčak ID:
240277
URI
Publication date:
30.6.2020.
Visits: 921 *