Tehnički vjesnik, Vol. 27 No. 4, 2020.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20200408155204
Effect of Inclination Angle on the Response of Double-row Retaining Piles: Experimental and Numerical Investigation
Jinbi Ye
; 1) School of Civil Engineering and Architecture, Xiamen University of Technology, 2) Engineering Research Center of Structure Crack Control for Major Project, Fujian Province University, Room 402, 6th Jinggong Yuan, No. 600 Ligong Road, Jimei District, Xiamen, 361024, Fujian Province, China
Chenfei Wang
; 1) School of Civil Engineering and Architecture, Xiamen University of Technology, 2) Engineering Research Center of Structure Crack Control for Major Project, Fujian Province University, Room 402, 6th Jinggong Yuan, No. 600 Ligong Road, Jimei District, Xiamen, 361024, Fujian Province, China
Weipeng Huang
; Xiamen Zhongjian Dongbei Design Institute Co., Ltd, No. 120 Changqing Beili, Siming District, Xiamen, 361012, Fujian Province, China
Jing Zhang
; Department of Civil Engineering, Ryerson University, M5B 2K3, ON, Toronto, Canada
Xianqi Zhou
; 1) School of Civil Engineering and Architecture, Xiamen University of Technology, 2) Engineering Research Center of Structure Crack Control for Major Project, Fujian Province University, Room 402, 6th Jinggong Yuan, No. 600 Ligong Road, Jimei District, Xiamen, 361024, Fujian Province, China
Sažetak
The excavation depth of foundation pits has been increasing along with the continuous development of underground space and high-rise buildings. As a result, traditional double-row vertical piles cannot meet the ground settlement and deflection requirements. This study proposed a double-row pile optimization method to extend the suitability of double-row retaining piles to greater excavation depth. The optimization model was established by adjusting the inclination angle of the front and rear piles. Physical scale model tests were performed to analyze the effect of the inclination angle on the pile head displacements and bending moments during excavations and step loadings using three schemes, namely, traditional double-row piles with vertical piles, double-row contiguous retaining piles with batter pile in the front row, and double-row contiguous retaining piles with batter pile in both rows. Numerical simulations were also conducted to verify the effectiveness of the inclination angle adjustment in optimizing the double-row piles. Results indicate that the increase in the displacement and bending moment of the double-row contiguous retaining batter piles is not evident during excavation and step loading when compared with those of the double-row vertical piles and the double-row contiguous retaining piles with batter pile in the front row. Thus, double-row contiguous retaining batter piles can be used in deep foundation pits. The tilt angle is also excessively small to reduce the lateral displacement of the foundation pit, and the optimal tilt angle is 8° – 16°. Although the embedment depth can influence the deformation of the double-row contiguous retaining batter piles significantly, a critical embedment depth may be reached. The findings of this study can provide references for the optimization of double-row piles in foundation pits.
Ključne riječi
double-row contiguous retaining batter piles; foundation pit; inclination angle; optimization method; physical model test
Hrčak ID:
242315
URI
Datum izdavanja:
15.8.2020.
Posjeta: 1.791 *