Izvorni znanstveni članak
https://doi.org/10.5552/crojfe.2021.1099
Wood Quality Characterization of Sycamore Maple (Acer pseudoplatanus L.) and its Utilization in Wood Products Industries
Tomislav Sedlar
orcid.org/0000-0002-7124-4470
; University of Zagreb Faculty of Forestry and Wood Technology Svetošimunska cesta 23 10002 Zagreb CROATIA
Bogoslav Šefc
; University of Zagreb Faculty of Forestry and Wood Technology Svetošimunska cesta 23 10002 Zagreb CROATIA
Srđan Stojnić
; University of Novi Sad Institute of Lowland Forestry and Environment Antona Čehova 13 d 21000 Novi Sad SERBIA
Tomislav Sinković
; University of Zagreb Faculty of Forestry and Wood Technology Svetošimunska cesta 23 10002 Zagreb CROATIA
Sažetak
This study quantified the physical and mechanical properties of sycamore maple (Acer pseudoplatanus L.) as a basis for assessing wood quality. The physical properties of oven-dry density, density at 12% MC, green density, basic density, longitudinal, radial, tangential and volumetric shrinkages were tested and the mechanical properties of bending strength, modulus of elasticity at bending, compression strength parallel to grain and compression strength in radial and tangential direction as well as of Brinell hardness on the cross, radial, and tangential section were determined. Five sycamore maple trees from Medvednica region were selected for the purposes of this research. The results were compared with known literature data on sycamore maple wood, beech wood from the same sight, and beech wood from Gorski Kotar region. For a better understanding of sycamore maple physiology, as well as for assessing the quality of wood products, the distribution of wood properties within the tree radius, from pith to bark, was investigated. There was a general bell shaped distribution, in the radial direction, in wood density, and mechanical properties of sycamore maple wood. Shrinkages decreased from pith to bark, except for tangential shrinkage with bell shaped pattern. All investigated wood densities of sycamore maple from Medvednica were similar to the findings of studies known in literature, as well as shrinkages, except for the lower longitudinal shrinkage. Investigated mechanical properties of sycamore maple wood were similar to the findings of studies known in literature, except for the lower bending strength and modulus of elasticity (MOE). Investigated sycamore maple indicated better dimensional stability than beech wood from two locations in the region, although it did not match the beech wood regarding mechanical properties, especially wood hardness.
Ključne riječi
Hrčak ID:
262272
URI
Datum izdavanja:
1.6.2021.
Posjeta: 657 *