Izvorni znanstveni članak
https://doi.org/10.13044/j.sdewes.d9.0385
Design Optimization of Energy Efficient Residential Buildings in Mediterranean Region
Khaled Bataineh
; Department of Mechanical Engineering, Jordan University of Science and Technology, Irbid-Jordan
Ayham Al Rabee
; Department of Mechanical Engineering, Jordan University of Science and Technology, Irbid-Jordan
Sažetak
The purpose of this study is to introduce a methodology to identify optimal energy performance packages at the lowest cost during the estimated economic lifecycle for a residential building located in the Mediterranean climate. The method is applied to a detached single one-story building and calculations are performed for three climatic zones of Jordan which are relatively different from each other consider national factors. The energy conservation measures investigated are: dimming lighting control, building orientations, glazing type and its configurations, indoor conditions, upgrading heating, ventilation, air conditioning system, thermal insulation, and resident behavior. It was found that the optimum energy savings at the lowest cost are: 30%, 23%, and 39% for the reference building located in Irbid, Ma’an, and Aqaba respectively. The cost-optimal point is well identified in a hot climate. Based on the results, the climatic characteristics is a very important parameter affecting the reference building definition procedure. Based on the results, the methodology is highly sensitivity to national factors and utility rates and slightly sensitive to the discount rates, cost calculation period, and development price.
Ključne riječi
Cost –optimal energy performance; energy conservation measures; DesignBuilder; energy simulation; residential building; life cycle cost energy.
Hrčak ID:
275116
URI
Datum izdavanja:
30.6.2022.
Posjeta: 940 *