Skoči na glavni sadržaj

Sažetak sa skupa

https://doi.org/10.15836/ccar2023.314

X-ray phase contrast imaging of endomyocardial biopsy samples preserved in formalin and embedded in paraffin – a comparison of tissue preparation methods

Nikola Škreb orcid id orcid.org/0000-0003-1730-8768 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Filip Lončarić orcid id orcid.org/0000-0002-7865-1108 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Anne Bonnin orcid id orcid.org/0000-0001-5537-8682 ; Swiss Light Source, Paul Scherrer Institute, Villigen, Switzerland
Hector Dejea orcid id orcid.org/0000-0003-2584-9812 ; European Synchrotron Radiation Facility, Grenoble, France
Ivana Ilić orcid id orcid.org/0000-0003-1988-6684 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Hrvoje Gašparović orcid id orcid.org/0000-0002-2492-3702 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Boško Skorić orcid id orcid.org/0000-0001-5979-2346 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Bart Bijnens orcid id orcid.org/0000-0003-3130-6937 ; Instituto de Investigaciones Biomédicas August Pi i Sunyer (IDIBAPS), Barcelona, Spain
Davor Miličić orcid id orcid.org/0000-0001-9101-1570 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Ivo Planinc orcid id orcid.org/0000-0003-0561-6704 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia
Maja Čikeš orcid id orcid.org/0000-0002-4772-5549 ; University Hospital Centre Zagreb, University of Zagreb School of Medicine, Zagreb, Croatia


Puni tekst: engleski pdf 859 Kb

str. 314-315

preuzimanja: 50

citiraj

Preuzmi JATS datoteku


Sažetak

Ključne riječi

heart transplantation; graft rejection; synchrotron imaging; histology

Hrčak ID:

310243

URI

https://hrcak.srce.hr/310243

Datum izdavanja:

28.11.2023.

Posjeta: 151 *



Background: Endomyocardial biopsy (EMB) is the gold standard in heart transplantation (HTx) follow-up, with samples commonly fixed with formalin, and then embedded in paraffin for histology analysis. Recently, EMB samples have been scanned with synchrotron X-ray phase-contrast imaging (X-PCI) to assess graft rejection. (1) We aim to compare imaging time efficiency and image quality between formalin-fixed and paraffin-embedded samples to determine the optimal scanning methodology.

Methods: Three adult patients undergoing EMB after HTx were included. EMB samples were initially stored in formalin and imaged by X-PCI at the Paul Scherrer Institute TOMCAT beamline (Villigen, Switzerland). On site samples were scanned in glass tubes in deionised, degassed water, and then embedded in paraffin, positioned on a holder, and scanned again using a multi-scale beamline set-up. Imaging time efficiency was measured by on-site sample preparation and scan time, and image quality was assessed with signal-to-noise ratio (SNR) and pixel resolution. Post-processing comparison included fibrosis quantification (using Ilastik for segmentation and Fiji for calculating the average percentage of collagen in 3 selected areas) and graft-rejection grading (assessed by two blinded observers based on the ISHLT 2004. criteria) (2).

Results: Scanning F1-F3 and P1-P3 samples produced the same imaging resolution, while F1-F3 samples exhibited higher SNR values (clearer sample visibility) (Table 1). On site preparation and scan time were shorter with P1-P3 samples. Fibrosis quantification produced similar results in all samples, with F1-F3 showing slightly higher collagen percentage compared to the corresponding P1-P3 samples (Table 1 andFigure 1). Samples F1 and F2 were graded as 1R, with others classified as 0R (ISHLT 2004.) (Table 1).

TABLE 1 Imaging time (including preparation and scanning), technical parameters and imaging data analysis between the two sample preparation methodologies.
Imaging time efficiencyTechnical image qualityImage post-processing analysis
SampleMethodologyOn-site preparation time (min:sec)Scan time
(min:sec)
SNR (dB)Average percentage of collagen in 3 selected areas (%)Rejection grading
(ISHLT 2004. criteria)
F1Formalin3:5849:08112,160.341R
P1Paraffin0:176:3472,860.210R
F2Formalin4:1337:24119,390.161R
P2Paraffin0:2012:0354,650.110R
F3Formalin4:2149:08112,190.370R
P3Paraffin0:3212:0856,720.120R
FIGURE 1 Left side of the figure showing X-PCI images of formalin samples and the right side of the figure showing X-PCI images of the same samples in paraffin. Both set of samples are marked with the corresponding tissue areas for the collagen segmentation and quantification (collagen shown in light blue).
CC202318_11-12_314-5-f1

Conclusion: Embedding EMB samples in paraffin is more time efficient in terms of on-site sample preparation and imaging. Results showed similar fibrosis quantification regardless of preparation methods, whereas rejection grading did not differ in clinically meaningful way. In conclusion, in initial testing using small sample number, no significant difference was found between the preparation methods.

Supported by the Croatian Science Foundation (project no. UIP-2020-02-5572).

LITERATURE

1 

Planinc I, Ilic I, Dejea H, Garcia-Canadilla P, Gasparovic H, Jurin H, et al. A Novel Three-Dimensional Approach Towards Evaluating Endomyocardial Biopsies for Follow-Up After Heart Transplantation: X-Ray Phase Contrast Imaging and Its Agreement With Classical Histopathology. Transpl Int. 2023 January 24;36:11046. https://doi.org/10.3389/ti.2023.11046 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/36762268

2 

Stewart S, Winters GL, Fishbein MC, Tazelaar HD, Kobashigawa J, Abrams J, et al. Revision of the 1990 working formulation for the standardization of nomenclature in the diagnosis of heart rejection. J Heart Lung Transplant. 2005 November;24(11):1710–20. https://doi.org/10.1016/j.healun.2005.03.019 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/16297770


This display is generated from NISO JATS XML with jats-html.xsl. The XSLT engine is libxslt.