Metalurgija, Vol. 48 No. 1, 2009.
Izvorni znanstveni članak
Influence of the section size and holding time on the graphite parameters of ductile iron production
S. Bockus
; Faculty of Mechanics and Mechatronics, Kaunas University of Technology, Kaunas, Lithuania
G. Zaldarys
; Faculty of Mechanics and Mechatronics, Kaunas University of Technology, Kaunas, Lithuania
Sažetak
This work was conducted to establish the conditions required to produce a desirable structure of the castings of various section sizes. This investigation was focused on the study of the influence of cooling rate or section size and holding time on graphite parameters of the ductile iron. Plates having thickness between 3 and 50mm were cast in sand molds using the same melt. The present investigation has shown that the section size of ductile iron castings and holding time had strong effect on the graphite parameters of the castings.
Ključne riječi
ductile iron; section size; microstructure; mechanical properties
Hrčak ID:
28856
URI
Datum izdavanja:
1.1.2009.
Posjeta: 2.527 *