Tehnički glasnik, Vol. 18 No. 2, 2024.
Prethodno priopćenje
https://doi.org/10.31803/tg-20240422144655
Analysis of the Impact of Geometry Modifications on the Fit of Splined Shaft Connections Manufactured Using Selected AM Methods
Grzegorz Budzik
orcid.org/0000-0003-3598-2860
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Tomasz Dziubek
orcid.org/0000-0002-3259-446X
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
*
Małgorzata Gontarz
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Bartłomiej Sobolewski
orcid.org/0000-0003-3824-6228
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Małgorzata Zaborniak
orcid.org/0000-0002-3219-3092
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
* Dopisni autor.
Sažetak
Broadly, understood additive manufacturing techniques expand the spectrum of production of machine parts that are used in various types of devices. However, the requirements to ensure dimensional and shape accuracy require the determination of appropriate material allowances or clearances to enable correct assembly. For the above reasons, the study presents an analysis of the impact of the assumed geometry modifications on the possibility of assembling a splined connection manufactured using selected AM techniques. The work focused on the analysis of changes in geometry resulting from the technology used. Using the Atos II Triple Scan optical measurement system and Gom Inspect software, the possibility of installation was determined for four variants of the splined shaft connection geometry, resulting from the technologies used.
Ključne riječi
3D Printing; CAx systems; coordinate measurements method; coordinate optical measurements; quality control
Hrčak ID:
316916
URI
Datum izdavanja:
31.5.2024.
Posjeta: 438 *