Prethodno priopćenje

https://doi.org/10.17559/TV-20240627001805

Thermal Load Analysis of the Threaded Spindle Bearing in Terms of the Housing Construction for the Case of "Axial Assembly" of the Axial Angular Contact Ball Bearing

Vladislav Krstic orcid.org/0000-0002-4372-7977 ; University of Niš, Pedagogical Faculty in Vranje, Partizanska 14, 17500 Vranje, Republic of Serbia *
Dragan Milcic ; University of Niš, Faculty of Mechanical Engineering, Aleksandra Medvedeva 14, 18000 Niš, Republic of Serbia
Miodrag Milcic ; University of Niš, Faculty of Mechanical Engineering, Aleksandra Medvedeva 14, 18000 Niš, Republic of Serbia
Marija Stoic ; University of SlavonskiBrod Technical department, Trg Ivane Brlić Mažuranić 2,35000 Slavonski Brod

* Dopisni autor.

Sažetak

Modern engineering increasingly requires certain guidelines/procedures for faster, simpler and more efficient optimization of machine tool systems even in the design phase. Accordingly, the task of this paper has been defined, which is focused on the analysis of the impact of the machine housing construction on the thermal loads of the threaded spindle bearing. The focus of the work is on the bearing performed using an axial angular contact ball bearing of the ZKLF type from the German manufacturer Schaeffler. The result of this research gave a guideline to designers to optimize the thermal load of the bearing of the threaded spindle made using the mentioned type of bearing even in the design phase.

Ključne riječi

ball bearing; housing; thermal load; threaded spindle

Hrčak ID:

326001

URI

https://hrcak.srce.hr/326001

Datum izdavanja:

31.12.2024.

Posjeta: 9 *